Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Article Number: 000125739

PowerStore: Embedded Module LEDs

Summary: This article covers the PowerStore major component LED states, locations, descriptions, and more. Understanding the LED states is critical for troubleshooting.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Symptoms

This article covers the PowerStore major component LED states, locations, descriptions, and more. Understanding the LED states is critical for troubleshooting.
 

Table of Contents

  1. Before you Begin
  2. Base Enclosure Front View
  3. Base Enclosure Rear View
  4. Embedded Module View
  5. Base Enclosure I/O Module View
  6. Base Enclosure Power Supply
  7. 2U, 25-drive Expansion Enclosure Front View
  8. 2U, 25-drive Expansion Enclosure Rear View
  9. 2U, 25-drive Expansion Enclosure Power Supply and Cooling Module
     

 1. Before you Begin

  • This article uses details from the PowerStore Hardware Information Guide.
  • Each Node contains one embedded module that can hold one 4-port card for front-end connectivity and internal communication between nodes and appliances.
  • This article will include a diagram from Node A (bottom node). Node B will have the same LED indicator structure, however it is inverted as the Node is installed upside down in the Enclosure.  
     

 2. Base Enclosure Front View


The front of the base enclosure contains the following elements:
SLN321266_en_US__1image(19245)
 
Location Description
1 Drives.
2 NVRAM NVMe drives (Note: In configurations that only use two NVMe NVRAM drives, slots 21 and 22 must remain empty.)
3 Base enclosure power-on LED
4 Drive power and activity LED
5 Drive fault LED
Table 1: Base Enclosure Front View


Base enclosure and drive LEDs:
SLN321266_en_US__2image(19321)
LED Location State Description
Drive fault 1 Amber Fault has occurred.
Off No fault has occurred.
Drive Activity 2 Blue Drive activity.
Off Drive is powered off.
Base enclosure power and fault 3 Blue Power is on. No fault has occurred.
Amber Power is on. Fault has occurred within the enclosure.
Blue and amber alternating System is not initialized.
Off Power is off.
Table 2: Base Enclosure and Drive LEDs

 

 3. Base Enclosure Back View

  • The rear of the base enclosure contains two nodes: Node A and node B.
  • Each Node contains the following hardware components:
  • One embedded module
  • Two optional I/O modules
  • One power supply module
SLN321266_en_US__3image(19249)
 
Location Description
1 Node B
2 Node A
3 Power supply module
4 I/O module, slots 0 and 1
5 Embedded module
Table 3: Base Enclosure Back View

 

 4. Embedded Module View

  • Each node contains one embedded module that can hold one 4-port card for front-end connectivity and internal communication between nodes and appliances.
  • The first two ports of the 4-port card on the embedded module connect to a 10GbE/25GbE Ethernet switch.
  • Note: Both nodes must have the same type of embedded modules in the same slots.
  • The embedded module contains the following components:
  • One 4-port card
  • One non-maskable interrupt (NMI) button
  • Two mini-SAS HD back-end ports
  • Two RJ-45 LAN connectors
  • System management Port
  • Service Port
  • One USB port.
  • One mini serial port
  • One DB9 serial port

Embedded module and 4-port card LED status:
SLN321266_en_US__4image(19250)

Embedded module LEDs:
LED Location State Description
Embedded module power 1 Amber Embedded module has faulted.
Off No fault has occurred, normal operation.
Ethernet port link 2 Green Link established.
Off No link established
Ethernet port activity 3 Amber blinking Port activity.
Off No port activity.
SAS port link 4 Blue SAS port link is up.
Off No link established.
Port link 5 Green Link up with high speed.
Amber Link up with degraded speed.
Off Link down
Node Fault 6 Amber Fault has occurred.
Blue Node in Degraded Mode.
Amber or blue blinking System is booting.
Blue and amber alternating (blue for 3 seconds) System is not initialized. A management IP address has not been assigned.
Blue and amber alternating at one second intervals Node in Service Mode.
Off No fault has occurred. normal operation.
Node Power 7 Green Node is no (main power).
Green blinking Node is initializing a serial over LAN session (Standby Mode).
Off Node is off.
Unsafe to remove 8 White Do not remove the node. Improper removal could cause data loss.
Off Safe to remove the embedded module when the embedded module has been properly prepared.
Table 4: Embedded Module View
 

 5. Base Enclosure I/O Module View

SLN321266_en_US__5image(19252)
The example above is an Ethernet module.
 
 
LED Location State Description
Port Link 1 Green or blue Link up
Off Link down
Power fault 2 Green Power on
Amber Power fault
 
Table 5: Base Enclosure I/O Module View
 

6. Base Enclosure Power Supply

  • Each node of the base enclosure will contain a power supply.
  • If a power supply fails on a node, the other power supply maintains the power for the entire appliance.

Base enclosure power supply LEDs:
SLN321266_en_US__6image(19253)
 
LED Location State Description
Fault 1 Solid amber Power supply or backup fault. check cable connection.
Off No fault.
DC power (output) - Not Supported 2 Green N/A.
Off N/A.
AC power (input) 3 Green AC power is on.
Off AC power is off. Verify source power.
Table 6: Base Enclosure Power Supply

 

7. 2U, 25-drive Expansion Enclosure Front View

The front of the 2U, 25-drive expansion enclosure includes the following components:

  • Drives in 2.5 inch carriers (hot-swappable)
  • Status LEDs
2U, 25-drive Expansion Enclosure Front View:
SLN321266_en_US__7image(19304)
Location Description
1 2.5 inch, 12-Gb/s SAS drives
2 Expansion enclosure fault LED (amber)
3 Expansion enclosure power status LED (blue)
4 Drive status and activity (blue)
5 Drive fault LED (amber)
Table 7: 2U, 25-drive Expansion Enclosure Front View


2U, 25-drive Expansion Enclosure and Drive Dtatus LEDs:
LED Location Color State Description
Expansion enclosure fault 2 Blue On No fault
Amber On Fault
Expansion enclosure power 3 Blue On Powering up and powered up
— Off Powered down
Drive Fault 4 Amber On Fault
— Off No fault
Drive power and activity 5 Blue On Powering up and powered up
Blinking Drive activity
Table 8: 2U, 25-drive Expansion Enclosure and Drive Dtatus LEDs

 

8. 2U, 25-drive Expansion Enclosure Rear View

The rear of the 2U, 25-drive expansion enclosure includes the following components:
SLN321266_en_US__8image(19305)
Location Description
1 Power supply and cooling module (B)
2 12-Gb/s SAS link control card (LCC) (B)
3 Power supply and cooling module (A)
4 12-Gb/s SAS link control card (LCC) (A)
Table 9: 2U, 25-drive Expansion Enclosure Rear View


2U, 25-drive Expansion Enclosure LCC ports, LEDs, and connectors:
SLN321266_en_US__9image(19306)

2U, 25-drive Expansion Enclosure LCC Component Locations:
Location Description
1 Ejector latch handles.
2 LCC fault LED
3 LCC management port (RJ-12) (not used)
4 Back-end bus ID display (always displays 01).
5 LCC power LED
6 Enclosure ID display
7 12-Gb/s SAS ports
8 SAS port status LED
Table 10: 2U, 25-drive Expansion Enclosure LCC Component Locations


12-Gb/s LCC LED Status:
LED Location Color State Description
LCC fault LED 2 Amber On Fault within the LCC
— Off No fault or powered off
LCC power LED 5 Green On Powered on and no fault
— Off Powered off
SAS port status LED 8 Amber On SAS port faulted
Blue On SAS port linked up
— Off No connector in port
Table 11: 12-Gb/s LCC LED Status

 

9. 2U, 25-drive Expansion Enclosure Power Supply and Cooling Module

The following figure shows an example of a 2U, 25-drive expansion enclosure power supply, cooling module and status LEDs:

SLN321266_en_US__10image(19307)

2U, 25-drive Expansion Enclosure Power Supply and Cooling Module:
Location Description
1 Ejector latch handle
2 AC power LED (input)
3 DC power LED (input) - (not supported)
4 Power supply and cooling module fault LED
5 Ground screw
6 Power supply AC power in
Table 12: 2U, 25-drive Expansion Enclosure Power Supply and Cooling Module


2U, 25-drive Expansion Enclosure Power Supply and Cooling Module LED status:
LED Location Color State Description
AC power LED (input) 2 Green On AC power on
— Off AC power off, verify source power.
DC power LED (output) 3 Green On DC power on (not supported)
— Off DC power off, verify source power.
Power supply and cooling module fault LED 4 Amber On Fault
  Blinking During power shutdown and during overvoltage (OVP) and under undervoltage protection (UVP) fault
— Off No fault or power off
Table 13: 2U, 25-drive Expansion Enclosure Power Supply and Cooling Module LED status
 

Cause

 

Resolution

 

Article Properties

Affected Product

PowerStore

Last Published Date

19 Aug 2021

Version

5

Article Type

Solution

Back to Top