Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

如何在 Dell Security Management Server 中新增 Active Directory 端點群組

Summary: 本文探討如何在 Dell Security Management Server (先前稱為 Dell Data Protections Server) 中新增 Active Directory 端點群組。

This article applies to   This article does not apply to 

Instructions

受影響的產品:

  • Dell Security Management Server
  • Dell Security Management Server Virtual
  • Dell Data Protection | Enterprise Edition
  • Dell Data Protection | Virtual Edition

受影響的版本:

  • v9.7 及更新版本

本文描述:

  • Dell Security Management Server AD 端點群組需求
  • 建立 AD 端點群組
  • 將裝置新增至 AD 端點群組
  • 新增 AD 端點群組至 Dell Security Management Server

Dell Security Management Server AD 端點群組需求

  • Dell Security Management Server (先前稱為 Dell Data Protection Server) v9.7 或更新版本
  • 將 AD 端點群組範圍設定為全域
  • AD 端點群組類型設定為安全性
  • 在 AD 端點群組中,至少必須使用 Dell Data Security (先前稱為 Dell Data Protection) 8.12 版或更新版本啟動一個端點,並執行 Dell Security Management Server 的原則更新。
  • 託管終結點必須對其所屬的所有組織單位 (OU) 安全組具有讀取訪問許可權。
注意:Dell Security Management Server 不支援巢狀 AD 群組。
  1. 在組織單位 (OU) 中,對 Active Directory 或資料夾按右鍵,選取新增,然後按一下群組。
    建立新群組
  2. 填入群組名稱,將群組範圍設為全域,將群組類型設為安全性,然後按確定。
    填入群組名稱,然後選擇範圍與類型
    注意:SuperDuperAwesomeStuff 被用作端點安全組名稱的範例。
  1. 右鍵按下所需的安全組,然後選擇 屬性
    按一下內容
  2. 選取 成員 標籤,然後按一下 新增
    按一下「新增」
  3. 計算機不在預設物件類型中。按兩下 物件類型 以修改搜尋條件。
    按一下物件類型
  4. 檢查 電腦, 然後按下 確定
    預設物件類型:
    電腦已清除
    已修改:
    選取的電腦
  5. 在物件名稱下,輸入所需的電腦名稱,然後按下 檢查名稱。驗證後按下「確定
    輸入電腦名稱,然後按一下檢查名稱
    注意:
    • 如果 「檢查名稱 」未返回任何結果,請驗證「位置」是否已正確設置為終結點的域。
    • 00115D009A15 是螢幕擷圖中使用的端點範例。
  6. 一下套用 ,將端點新增至端點群組。
  1. 在 Dell Data Protection Server 中,登入遠端管理主控台。
  2. 在遠端管理主控台中,展開 填入, 然後按一下 端點群組
    按一下端點群組
  3. 在端點群組下,按一下 新增
    按一下「新增」
  4. 選取 Active Directory 群組 作為端點群組的類型。
    選取 Active Directory 群組
  5. 填入 群組名稱說明 (選用) 和 AD 群組 名稱。
    填入群組名稱和 AD 群組
    注意:
    • 群組名稱 = Dell Data Protection 伺服器參照 AD 端點群組的名稱
    • AD 群組 = AD 端點群組名稱
    • 如果未為 AD 群組傳回任何資料,可能是因為:
      • 尚未使用 AD 端點群組內的 Dell Data Security 產品啟動端點。
      • AD 群組名稱不正確。
      • AD 群組領域未設為全域。
      • AD 群組類型未設為安全性。
        找不到 AD 群組的資料範例
        AD 群組的正確資料傳回範例
        注意:
        • 出於安全考慮,搜尋結果中隱藏了 OU 結構。只會顯示 AD 端點群組和網域。
        • 預覽 會顯示該端點群組內所有受管理的 Dell Data Security 端點。
        • 遠端管理主控台僅顯示 Dell Data Security 產品管理的端點。
  6. 填入端點群組資訊後,請按 一下新增群組按一下確定,確認顯示的關於潛在效能影響的警告。
    按一下新增群組
  7. 新增群組後,展開 管理, 然後按一下 認可
  8. 新增 解以詳述變更,然後按一下 認可原則
    認可原則
    注意:在選取 認可原則 之前,AD 端點群組不會變成作用中。

如要聯絡支援部門,請參閱 Dell Data Security 國際支援電話號碼
請前往 TechDirect,以線上產生技術支援要求。
如需更多深入見解與資源,請加入 Dell 安全性社群論壇

Additional Information

 

Affected Products

Dell Encryption
Article Properties
Article Number: 000124771
Article Type: How To
Last Modified: 02 Jul 2024
Version:  11
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.