Dell Unity: Liste der Netzwerkports (vom Nutzer korrigierbar)
Summary:
Dieser Artikel enthält eine allgemeine Liste von Ports, die auf einer Fire Wall geöffnet werden sollten, um eine ordnungsgemäße Kommunikation mit Unity-Lösungen zu ermöglichen. Dazu
gehören ESRS- und Cloud IQ-Funktionen.
...
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
Unfähigkeit, das System über eine Firewall in der Infrastruktur ordnungsgemäß über die Befehlszeile, ESRS, Cloud IQ oder WebUI-Services zu verwenden.
Cause
Für eine angemessene Infrastruktursicherheit ist es üblich, mehrere Firewalls in der Infrastruktur zu haben. Eine Reihe von Ports muss jedoch offen sein, um eine ordnungsgemäße Systemnutzung zu ermöglichen. Wenn diese Ports nicht geöffnet sind, kann nicht auf Nutzerdaten zugegriffen oder eine ordnungsgemäße Systemadministration ermöglicht werden.
Zusätzlich zu dem Dokument, auf das verwiesen wird, soll dieser Artikel bei der zentralen Lokalisierung der Ports für eine einfache Referenz durch Netzwerkadministratoren helfen.
Resolution
Speziell für Unity ESRS-Konnektivität zu Dell Dies sind die Ports, die offen sein müssen (nur ausgehend). Es sind keine eingehenden Ports erforderlich (vom Internet zum Unity-System). Diese sind nur für die Unity-Management-IP-Adresse erforderlich.
Anschlüsse
Richtung offen
Unity
443 und 8443
>>>>>
*,emc.com
Für die gesamte andere Unity-Kommunikation Öffnen Sie die unten aufgeführten Ports auf den Netzwerkfirewalls, um Administratoren, Endnutzern und dem Support ordnungsgemäß den Remotezugriff auf das System zu ermöglichen: