Article Number: 000130111
When attempting to wake a system from sleep when connected to a Dell Dual Video USB3.0 (D1000), Dell USB 3.0 (D3100), or Dell Universal (D6000 series) Docking Station when using the dock to also charge the system. You will find that you are unable to wake the unit from sleep, if you disconnect the system from the docking station.
The system is working as intended.
This feature is only functional when AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power as shown in the "Note" in Figure 1 & 2.
Platform connected by | Power supply prerequisites | BIOS setting prerequisites |
---|---|---|
USB Type-A | Power adapter plug on platform | Enable "USB wake support" |
USB Type-C | Power adapter plug on D6000 | Enable "USB wake support" |
Figure 1 - System BIOS (F2 on Boot up) information about USB ports being disabled.
Figure 2 - USB Wake Support Note.
If you have further questions about this solution, contact Dell Technical Support.
Dell Dual Video USB3.0 Docking Station D1000, Dell Universal Dock D6000, Dell USB3.0 dock D3100
05 Apr 2021
4
Solution