Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

How do I find the serial number of a CLARiiON array?

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Q: How do I find the serial number of a CLARiiON array?

A: There are three ways to locate the serial number of a CLARiiON array

  • Navisphere Manager shows the serial number when the properties of the array are displayed.
  1. Right-click the on the array 
  2. Select Properties
  • The Navisphere CLI getagent command line returns the serial number.
  1. Run the command:   
navicli -h <IP_address_of_either SP> getagent

The output of the command looks similar to the below. The serial number is in bold.

Agent Rev: 6.2.1 (0.4)
Name: K10
Desc:
Node: A-APM000249XXXX4
Physical Node: K10
Signature: 717010
Peer Signature: 717008
Revision: 2.02.1.60.5.005
SCSI Id: 0
Model: 600
Model Type: Rackmount
Prom Rev: 3.09.00
SP Memory: 4022
Serial No: APM000249XXXX4
SP Identifier: A
Cabinet: SPE

  • Look at the back of the array. There is a WWN seed sticker beside the serial number sticker.

Affected Products

CLARiiON
Article Properties
Article Number: 000020755
Article Type: How To
Last Modified: 20 Nov 2020
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.