Riepilogo dell'articolo: in questo articolo vengono illustrati i comandi necessari per impostare un nome utente e una password per l'accesso tramite HTTP e/o Telnet agli switch PowerConnect.
Per configurare un nome utente e una password per l'accesso tramite interfaccia grafica Web o Telnet, immettere i seguenti comandi.
Quello che segue è un esempio con nome utente Dell e password PowerConnect. Questi sono solo esempi ed è consigliabile utilizzare credenziali più complesse e difficili da indovinare per proteggere lo switch.
Nota: è possibile creare più utenti sullo switch, nonché diversi livelli/livelli di privilegi di accesso. Il livello di privilegi può essere 0, 1 o 15 dove 0 indica nessun accesso, 1 accesso in sola lettura e 15 accesso in lettura e scrittura.