Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Dell Networking PowerConnect 2800型号交换机上的基本命令行界面

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions



本文讨论Dell Networking PowerConnect 2800型号交换机上通过命令行提供的有限数量的命令。

 


基本CLI概述
 


PowerConnect 28xx系列支持基本控制台CLI界面和单个telnet会话。
 
 

 

 要访问此串行控制台,交换机必须处于受控模式。默认情况下,交换机处于非受控模式。如果对切换至受控模式不熟悉,请参阅文章HOW10276“How to access Management for the PowerConnect 2800 series switches”(如何访问PowerConnect 2800系列交换机的管理)。

 

2808型号没有串行端口用于连接控制台。因此,2808没有和其余2800型号交换机一样的命令行功能。

 

CLI可用于:
 
  • 重新引导设备
  • 将系统还原为默认值(除了2808必须从Web界面重置)
  • 下载或上传配置、映像或引导文件
  • 创建本地数据库用户(用于设备管理)
  • 定义SNMP团体
  • 定义静态IP地址
  • 执行show tech-support命令
 
 
 
 
重新引导设备
 
# reload

此命令将重置整个系统并断开当前会话的连接。Do you want to continue?(是否要继续?)(Y/控制台N)[N] Y
Shutting down ...(正在关闭...)
Shutting down ...(正在关闭...)
 

还原系统默认值
 
       重新加载后以及交换机正在启动时,将显示点击“enter”的选项以停止自动启动并进入引导菜单。
在引导菜单中,按选择[2] Erase Flash File([2]擦除刷新文件),然后按Y>确认
            启动菜单
 
[1] Download Software(下载软件)
[2] Erase Flash File(擦除刷新文件)
[3] Enter Diagnostic Mode(进入诊断模式)
[4] Set Terminal Baud-Rate(设置终端波特率)
[5] Back(返回)
输入您的选择或按“ESC”退出:2
Warning! About to erase a Flash file.(将擦除刷新文件。)
 
Are you sure (Y/N) ?(是否确定(Y/N)?)y
 

升级固件
 
键入copy tftp:// / image从TFTP服务器提取映像文件。


console# copy tftp://10.0.0.2/ -10020 powerconnect_28xx.ros image

16-Dec-2008 14:35:59 %COPY-I-FILECPY: Files Copy - source URL tftp://10.0.0.2/powerconnect_28xx-10020.ros destination URL flash://image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!16-Dec-2008 14:39:07 %COPY-W-TRAP:复制操作
成功完成
!
Copy: 4606156 bytes copied in 00:03:37 [hh:mm:ss]
 
console#
 

创建用户的本地数据库
 
console# configure
console(config)# username admin password password level 15
console(config)#
 

SNMP 配置
 
console# configure
console(config)# snmp-server community public rw 10.37.123.10
console(config)#
 

IP地址分配
 
console# configure
console(config)# ip address 172.16.1.1 /24
console(config-if)#


 

Show Tech-Support
 
        Console# show tech-support
                

Affected Products

PowerConnect 2816, PowerConnect 2824, PowerConnect 2848
Article Properties
Article Number: 000120225
Article Type: How To
Last Modified: 21 Feb 2021
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.