Precision 工作站 T7610 配備兩張整合式網路適配器 (NIC)。每個網路配接卡會依序標示 (1 和 2)。
圖 1:Precision T7610 背板
PXE 開機可讓電腦在設定遠端映像伺服器時,透過網路從遠端伺服器啟動作業系統或映像。想要啟用 Precision T7610 上 PXE 開機的終端使用者應遵循以下準則。
注意:PXE 開機僅支持網路配接卡 1。網路適配器 2 不支援 PXE。
Enable PXE Booting
請遵循這些步驟,在 Precision T7610 啟用 PXE 開機:
- 開啟 T6710 電源。顯示 Dell 標誌時點選 F2 ,以進入 系統設定 (又稱為 BIOS)。
- 在左側導覽窗格中,選取 「System Configuration」卷標。
- 在左側導覽窗格中,選取 整合式網路配接卡 (此組態網路配接卡 1 為主網路配接卡)。
- 選取 Enabled w/PXE (啟用 w/PXE) 選項。
- 選 取「Apply」,然後 結束。
計算機現在會在重新啟動後嘗試開機至遠端映像伺服器。
圖 2:Precision T7610 系統設定 (BIOS)
圖 3:Precision T7610 網路組態選項
注意:對 Precision T7610 的 PXE 問題進行故障排除時,請先確定包含 PXE 映射伺服器的網路區段已連接至網路配接卡 1。此外,網路配接卡必須在BIOS中啟用。
建議的文章
以下是一些與本主題相關的建議文章,您可能會感興趣。