Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Article Number: 000186538

OptiPlex 5090 Mini Tower (MT) Teardown removal guide for customer replaceable unit (CRUs)

Summary: This article is a guide to the removal of those parts of the Dell OptiPlex 5090 Mini Tower desktop, that dell considers it OK for anyone to remove and replace.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Instructions

These guides take you step-by-step through the safe removal of the Customer Replaceable Unit (CRU) parts of a OptiPlex 5090 system. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides include pictures to reference what is involved.

Table of Contents:

  1. CRU Removal Guide

  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

The article below provides information about safe practices to consider before working with electrical equipment.


Back to Top

 

Removal Instructions

 

Note: Click the title of the section you want to open below, in order to see the contents.

 

|

 

Recommended Tools

 

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flat head screwdriver    
 
Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without specialty tools, that are not available to our onsite engineers.

 

  1. Pre-Removal Instructions Before removing the System Cover:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

  2. Looking at the rear of your PC, loosen the thumbscrews to unlock the right-hand side access panel.

Door

  1. Grip the tab at the back of the access panel and pull away from the rear of the PC. Lift the access panel away when the securing lugs are released.

Door 2

 

  1. Pre-Removal Instructions Before removing the Front Bezel:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. Looking at the left-hand side edge of the front bezel, release the three (3) retention tabs securing the bezel to the chassis.

Bezel

  1. Swing the bezel to the right where the hooks secure the bezel down the right-hand side.

Bezel 2

  1. Remove the bezel from the hinge slots.

 

  1. Pre-Removal Instructions Before removing the Hard Disk Drive (HDD):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. This system can fit two (2) 2½ inch HDDs in the top left-hand side corner of the system. Disconnect the power and data cables from the rear of the drive.

HDD

  1. Press the blue bracket tabs towards the middle of the drive and pull it away from the chassis.

HDD 2

 

  1. Pre-Removal Instructions Before removing the Solid State Drive (SSD):

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover

The M.2 2230 PCIe SSD:

  1. You can find the slot for the M.2 in between the expansion card slots and the heatsink on the motherboard. Remove the single screw securing the card to the motherboard

2230 SSD

  1. The end of the card lifts up, grip it and pull it out of the connector and the system

The M.2 2280 PCIe SSD:

  1. You can find the slot for the M.2 in between the expansion card slots and the heatsink on the motherboard. Remove the single screw securing the card to the motherboard

2280 SSD

  1. The end of the card lifts up, grip it and pull it out of the connector and the system

 

  1. Pre-Removal Instructions Before removing the Optical Disc Drive (ODD):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The optical disc drive is located on the front of the system. Remove the power and data cables from the rear of the drive. Push in the blue metal tab at the rear of the drive and push the drive out the front of the system.

Optical Disc Drive

  1. Grip the drive and pull it the rest of the way out of the system.

Note: Remove the metal bracket that is attached to the drive. You need to fit this to any replacement drive before you fit it back into the PC.

 

  1. Pre-Removal Instructions Before removing the Fan Duct Assembly:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The fan duct is fitted to the rear of the chassis. Press in on both blue tabs on either side of the duct.

Fan Duct

  1. Lift the duct out of the chassis.

 

  1. Pre-Removal Instructions Before removing the Expansion Cards:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The expansion card slots are located above the PSU in the bottom left-hand corner of the system. Flip the metal securing tab towards the rear of the PC. Check if the card is locked into the slot on the motherboard, if so pull the release tab while pulling straight out with card.

Expansion Card

  1. It should pull straight out of the chassis. Unless you are fitting a new card, this leaves you with a gap in the back of your system that you need to fit an option slot blank to.

Expansion Card 2

 

  1. Pre-Removal Instructions Before removing the Memory:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The memory slots are located between the front of the system and the fan duct. Press the securing clips on either side of the DIMM away from the DIMM to see it lift up out of the slot.

Memory

  1. Pull the memory DIMM out of the slot and the chassis.

Note: Repeat these steps for as many memory DIMMs as are located in the system.

 

  1. Pre-Removal Instructions Before removing the Coin Cell Battery:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The coin cell battery is located above the right-hand side edge of the PSU in the middle of the system. Using a plastic scribe or similar tool, pry back the latch and release the battery.

Coin Cell Battery

  1. Lift the battery up and out of the connector.

 

  1. Pre-Removal Instructions Before removing the Internal Speaker:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. Disconnect the speaker cable from the motherboard.

Speakers

  1. Pull the tab on the side of the speaker and slide it out the side of the chassis.

 

  1. Pre-Removal Instructions Before removing the WLAN (WiFi, Wireless) Card:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The Wireless card slot is located between the M.2 SSD slot and the front of the chassis. Remove the single screw locking down the antenna bracket.

WLAN

  1. Disconnect the WiFi antenna cables from the card. (The connector is a press stud and should pop off the card when you apply a little pressure.)

WLAN 2

  1. Pull the card out of the slot and the system.

 

  1. Pre-Removal Instructions Before removing the Power Supply Unit (PSU):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Please remove the System Cover.

  2. The PSU is located in the bottom of the left-hand side corner of the system. Lay the system on its side and disconnect the power cables from the motherboard and the drives.

PSU

  1. Remove the three (3) screws securing the PSU to the rear of the chassis. Press the metal tab on the right-hand side of the PSU and push the PSU towards the front of the chassis.

PSU 2

  1. Lift the PSU out of the system.

PSU 3

If you require further assistance, please contact technical Support.
Contact Us OptiPlex 5090 Customer replaceable unit (CRU) teardown index

Article Properties

Affected Product

OptiPlex 5090 Tower, OptiPlex 5090 Micro, OptiPlex 5090 Small Form Factor

Last Published Date

29 Jun 2023

Version

2

Article Type

How To

Back to Top