How to use and troubleshoot Dell Command | Update to update all drivers BIOS and firmware for your computer
Summary: Using the Dell Command Update utility to perform driver, BIOS, and firmware updates on your computer.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
This article provides guidance on using and troubleshooting Dell Command | Update (DCU) to update all drivers, BIOS, and firmware for your computer.
Table of Contents
- Dell Command | Update
- Installation of DCU
- Advanced Driver Restore for Windows Reinstallation
- Device Driver Version reporting or exporting
- Troubleshooting Dell Command | Update
Dell Command | Update
Dell Command | Update (DCU) is a Dell utility that allows you to automate driver, BIOS, and firmware updates on your computer.
The Dell Command | Update tool allows you to keep your computer up to date without you having to know every driver or update needed. It interrogates your computer and compares it to the available updates on dell.com/support for your specific computer.
Note: This application is compatible with Latitude E-Series, OptiPlex Desktops 745 and newer, Precision Workstations 390 and newer, Precision Mobile M2400 and newer and Venue Pro tablets.
Installation of DCU
You can download the latest version of the software from the following link: Dell Command | Update (Version 2.4.0, July 2018). Or search for the file within the Drivers & Downloads section and the Systems Management category for your computer at Dell Support Website > Drivers & Downloads.
Download the latest version then Double-click the file. Then click the INSTALL button on the Dell Update Package screen (Figure 1).
Note: You are using the most current version of the application. The images below may indicate previous versions but the installation process should remain the same.
Figure 1. Dell Command | Update Install screen.
Click YES to the User Account Control (UAC) prompt then click Next on the Dell Command Update setup screen.
Accept the License Agreement then Click Next to continue installation (Figure 2).
Figure 2: Accept the License Agreement and continue.
Click the Install button to continue (Figure 3).
Figure 3: Click Install to begin installation.
When the installation wizard is complete, click the Finish button (Figure 4).
Figure 4: Click Finish after the installation completes.
Close the Update Package window. And the installation is complete (Figure 5).
Figure 5: Click Close to finish the full installation process of Dell Command | Update.
How to use DCU
You can find the Dell Command Update application that is listed on your applications or all programs menu (Figure 6).
Figure 6: Location of Dell Command Update in the Apps menu
Double-Click Dell Command Update to open. It is recommended you select the Default settings, then Click the OK button (Figure 7).
Figure 7: Choose default settings and click OK to open the Dell Command | Update application.
Click the Check button to allow DCU to interrogate your computer and identify any needed updates for the computer (Figure 8).
Figure 8: Perform a Check for driver updates.
Depending on how current your computer is, you may have several updates, or like in this case a single update. Check the Recommended Updates and Check Automatically restart computer (when required) Then click the Install button (Figure 9).
Figure 9: Click Install to begin installation of recommended updates.
Figure 10: Customization screen for manual install of driver updates
Once all the updates are installed (multiple restarts possible), click the Close button (Figure 11).
Figure 11: Click Close after updates are installed and the computer finishes rebooting.
Your computer should now be up to date.
On the left side of the main screen, "Update History" can be checked to verify which updates have been installed to date (Figure 12).
Figure 12: Update History screen with report of recent updates
You can use the settings icon (small gear icon along the upper right corner) to set up a schedule to help keep the computer updates on a continuous basis (Figure 13).
Figure 13: Set a schedule for updates.
Advanced Driver Restore for Windows Reinstallation
Advanced Driver Restore provides a one-click installation of the base driver cab-file to provide device IDs for all internal devices. Once complete, you can reboot, open DCU, and run a check. With All Device IDs in place, it pulls "ALL" the latest drivers.
Dell hosts all CAB files at the link below.
Dell Command | Deploy - Driver Packs for Enterprise Client OS Deployment
Advanced Driver Restore for Windows Reinstallation process (Figures 14-16):
Figure 14: Selecting the Advanced Driver Restore option
Figure 15: The tool is preparing for the driver restore
Figure 16: Enabling the option and selecting the CAB file location to pull the drivers from
You must extract the driver cab for the specific computer onto a USB drive or other location. The CAB file can be loaded to baseline the Device Manger and prepare the computer for a full update "Check," by specifying the location.
Device Driver Version reporting or exporting
You can export a complete report of all current driver firmware, and BIOS versions by selecting "System Information" on the left side of the main screen. The screen below provides the option to Export the report (Figure 17):
Figure 17: Creating a driver information log file
You can then convert the report to an Excel file. Once the file has been exported to a location, open Excel and go to that file. You see the following option menu when you click to open the file. Choose the top option "As an XML Table" (Figure 18):
Figure 18: Open the report as an XML table.
Click "OK" on the following message that appears (Figure 19):
Figure 19: Click OK to continue.
Below is an example of an Excel report for the listed drivers and versions of the computer (Figure 20). This can be helpful in verifying that a driver did update to the latest version.
Figure 20: Excel report of installed drivers and versions
Troubleshooting Dell Command | Update
If you are experiencing issues downloading or installing drivers to your computer using Dell Command | Update, use one of the following options.
Using Dell SupportAssist to automatically check for and install updated drivers. Dell SupportAssist is now preinstalled on most all new Dell devices running the Windows operating system and can be found in the Start menu under All Programs in the Dell or Alienware folder. Information on using Dell SupportAssist, and a download link to download the utility, is available at the following location: Dell SupportAssist for PCs and tablets
You can also manually search for and install driver updates for your computer at Dell Support > Drivers & Downloads. Once at the Drivers & Downloads site, ensure that your computer model and operating system are correct, then use the Category drop-down menu to find the latest available drivers for your computer.
For additional reference on downloading and installing drivers, reference the following Dell Knowledge Base article: Drivers & Downloads FAQs
Additional Information
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
Affected Products
Latitude, XPS, Dell Command | Update, Venue 5055 Pro, Dell Venue 10 Pro 5056, Venue 5130 Pro (32Bit), Venue 5130 Pro (64Bit), Venue 7140 Pro, Venue 7130 Pro/7139 Pro, Venue 3845 Pro, Dell Venue 8 Pro 5855Article Properties
Article Number: 000108963
Article Type: How To
Last Modified: 13 Feb 2024
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.