Driver Installation Guide for Dell Wireless Dock D5000

Dell Wireless Dock D5000 works with the Wireless Docking software. The software comes pre-installed on your PC that is equipped with Dell 1601 Tri-Band WiGig card. If you need to download and install the driver manually, follow the instructions below.

Note: For optimal performance, Dell recommends updating the BIOS and Chipset driver on your PC before installing the DisplayLink driver for the docking station.

1. Browse to Dell Drivers & Downloads page
2. Enter the Service Tag of your PC or click Browse all products
3. Select your Dell PC from the list
4. Click Download next to the respective Dell Wireless card driver and save the file to your PC
5. Browse to the folder where the file was saved and double-click the driver installation file
6. Follow the screen instructions until the installation is complete
7. Restart the PC
8. Connect all the external devices to the docking station

Note: You will be prompted to install the Qualcomm Atheros Ethernet driver, Display Link, and Fresco Logic USB 3.0 Host controller driver. Select Yes to install these drivers. These drivers are required by the devices attached to the Dell Wireless Dock D5000 to work properly.