Fan error randomly occurring during the Power on Self-Test (POST) process on the Precision Workstation T3500

Table of Contents

• Fan error randomly occurring during the Power on Self-Test (POST)
• Solution

Fan error randomly occurring during the Power on Self-Test (POST)

There may randomly occur a Fan error during the Power On Self-Test (POST) process on the Precision Workstation T3500.

• Alert! Unable to initialize fan controller
  Alert! Front Fan Failure
  Alert! Card-cage fan failure
  Strike the F1 key to continue, F2 to run the setup utility
  Press F5 to run onboard diagnostics.

Back to Top

Solution

This issue can be resolved by disconnecting the AC power cable from the system and draining the power from the system by pressing and holding the power button on the front of the chassis. (Approximately 30 seconds). Reconnect the AC Power cord and restart the system, issue should be resolved

Back to Top