Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

连接戴尔 USB-C 转以太网(PXE 启动)适配器时显示检测错误

Summary: 下文介绍在连接戴尔 USB-C 转以太网(PXE 启动)适配器时出现的 Windows 未检测到错误。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms


戴尔 USB Type-C 转以太网转换器未连接错误

 

当您连接戴尔 USB-C 转以太网(PXE 启动)适配器时,Windows 操作系统可能会显示以下错误消息。

Task Sequencing Error
Failed to find a valid network adapter.
For more information, contact your system administrator or
helpdesk operator.

 


返回页首

 

Cause

此问题已确定是驱动程序所致。


返回页首

 

Resolution

 

在计算机上更新到最新的 Realtek USB GBE 以太网控制器驱动程序可解决此问题。要下载并安装最新的网络驱动程序,请按照下面提到的步骤操作。

  1. 浏览至 https://www.dell.com/support/drivers
  2. 识别您的戴尔计算机:
    1. 单击 Browse all products,然后从目录中选择您的戴尔转换器。
    2. 选择 Electronics and Accessories
    3. 转至 PC and Tablet Accessories
    4. 选择 Dell Adapter USB-C to Ethernet
  3. 选择戴尔计算机上安装的操作系统
  4. Category 下,选择 Network
  5. 找到最新的 Realtek USB GBE Ethernet Controller Driver 驱动程序。(版本为 2.45.2021.825 A21 或更高版本。)
  6. 单击 Download,将文件保存到您的计算机。
  7. 打开文件资源管理器并浏览至保存下载文件的位置。
  8. 双击已下载的网络驱动程序设置文件,然后按屏幕上的说明完成安装过程。


返回页首

 

Affected Products

G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Latitude Tablets, XPS Tablets, Dell Adapter USB-C To Ethernet
Article Properties
Article Number: 000194004
Article Type: Solution
Last Modified: 20 Jan 2022
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.