Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

iDRAC9 | Secure Enterprise Key Manager (SEKM) Support Enablement

Summary: This article discusses Secure Enterprise Key Manager (SEKM) Support Enablement for the iDRAC9 on Dell EMC PowerEdge servers.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

iDRAC9 3.31.31.31 firmware introduced support for Secure Enterprise Key Manager (SEKM). This is a licensed feature that allows users to leverage iDRAC9 to authenticate with Gemalto/SafeNet AT KeySecure Management Server through the Key Management Interoperability Protocol (KMIP).

Additional information regarding Secure Enterprise Key Management can be found at Secure Enterprise Key Manager Home page or Blog article: What’s the Key to a more secure and efficient data center?

Resolution

Initial SEKM iDRAC Support:

iDRAC9 3.31.31.31 firmware release is based off the March 2019 iDRAC9 3.30.30.30 firmware release. This is the initial iDRAC9 release that supports the SEKM feature. No additional features or enhancements have been added to this release except SEKM enablement. Only users that plan to leverage SEKM encryption feature in tandem with Gemalto/SafeNet AT KeySecure Management Server should apply this update to their iDRAC9 controllers.

SEKM iDRAC Release Limitations:

SEKM support will not be included in all iDRAC9 firmware releases. Any updates of iDRAC9 firmware to SEKM enabled servers which do not support SEKM will cause the SEKM authentication to fail. SEKM is only supported in the following planned iDRAC9 releases:

SLN317559_en_US__1icon After the iDRAC9 4.00.00.00 release, SEKM will be a standard feature included in all 4.XX.XX.XX releases moving forward.

Dell EMC PowerEdge Servers ordered with Second Generation Intel Xeon Scalable processors (Cascade Lake) can enable the SEKM feature with iDRAC9 3.31.31.31 release.

Article Properties
Article Number: 000177799
Article Type: Solution
Last Modified: 21 Feb 2021
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.