Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Sådan aktiverer du Rapid Per-VLAN Spanning Tree (Rapid-PVST) eller Per-VLAN Spanning Tree (PVST) for switche i Dell Networking N-serien

Summary: Sådan aktiverer du Rapid Per-VLAN Spanning Tree (Rapid-PVST) eller Per-VLAN Spanning Tree (PVST) for Dell Networking N-seriens switche.

This article applies to   This article does not apply to 

Instructions

Indholdsfortegnelse

Aktivering af PVST

For at skifte til PVST skal du indtaste følgende kommandoer:

console> enable
console# config

Til hurtig pvst:

console(config)# spanning-tree mode rapid-pvst

For ældre enheder, der bruger PVST:

console(config)# spanning-tree mode pvst
Bemærk: Med de nyeste firmwareversioner af switchen understøtter begge PVST-tilstande op til 64 VLAN'er. Se brugervejledningen til din model og firmwareversion for at få flere oplysninger. Dell Support

 
For at fjerne specifikke VLAN er fra PVST og inkludere specifikke VLAN er skal du indtaste følgende kommandoer. Dette eksempel fjerner VLAN 10 og tilføjer VLAN 20.

console(config)#no spanning-tree vlan 10
console(config)#spanning-tree vlan 20

Angivelse af Root Bridge-prioritet

Følgende kommando angiver prioritet for valg af rodbro. I dette eksempel indstilles vlan 20 og 30 som prioritet 4096 og VLAN 40 til 45 som prioritet 8192.

console(config)# spanning-tree vlan 20,30 priority 4096
console(config)# spanning-tree vlan 40-45 priority 8192

Aktivering af PortFast

Det anbefales at konfigurere alle edge-porte, porte, der går til slutenheder såsom printere, telefoner, servere, arbejdsstationer, der skal konfigureres som PortFast. En port i PortFast flyttes direkte til videresendelsestilstanden, når linket kommer op uden at vente på forsinkelsen af fremadtiden.

console(config)#interface te1/0/1
console(config-if)#spanning-tree portfast
Advarsel: Konfigurer ikke PortFast på grænseflader, der tilsluttes en anden switch eller netværksenhed.

Bekræft Spanning-tree

Kør følgende kommando for at gennemse PVST. X erstattes med det VLAN-id, du vil kontrollere.

console# show spanning-tree vlan X

Affected Products

N Series, PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N2200-ON Series, PowerSwitch N3000 Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC PowerSwitch N3100 Series , Dell EMC Networking N3200-ON ...

Products

PowerSwitch N3000 Series
Article Properties
Article Number: 000120211
Article Type: How To
Last Modified: 12 Feb 2024
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.
Article Properties
Article Number: 000120211
Article Type: How To
Last Modified: 12 Feb 2024
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.