This article deals with the correct usage and handling of a Dell USB-C dongle.
(Figure.1 Dell DA200 Adapter)
The Dell DA200 Adapter - connects your mobile computer to an external display with your choice of HDMI or VGA outputs.
Also applicable to:
- Dell USB-C to VGA (Video Graphics Array)
- Dell USB-C to HDMI (High-Definition Multimedia Interface)
- Dell USB-C to DP (DisplayPort)
- Dell USB-C to USB-A
- Dell USB-C to Ethernet (Network Interface Controller)
The correct handling of the adapter is to plug it into the mobile device with the adapter supported on the same surface and without any bends or twists to the USB-C cable.
(Figure.2 Correct cable position)
Note: Ensure that the USB-C connector is fully seated, as are any cables plugged to the adapter side.
Caution: Excessive bending and twisting may damage the USB-C cable or shorten the devices working lifespan and durability.
|
|
(Figure.3 Do not double the USB-C connector back over the Adapter) |
(Figure.4 Do not twist the USB-C cable) |
|
|
(Figure.5 Do not bend the USB-C cable at the adapter at a right angle) |
(Figure.6 Do not bend the USB-C cable at the USB-C connector at a right angle) |
Note: Do not leave the adapter to dangle off the side of the desk while connected at either end to another device.
Back to Top