How to identify the iDRAC version embedded in a PowerEdge server and hardware leveraging PowerEdge server hardware
Summary: Most PowerEdge servers have an embedded Integrated Dell Remote Access Controller (iDRAC). Some storage, hyper-converged, solution hardware products leverage the PowerEdge servers hardware also have an embedded iDRAC. This article helps to quickly identify the iDRAC version. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Most PowerEdge servers and other products leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller.
Identify the iDRAC version based on PowerEdge model
The Dell PowerEdge servers by generation lists PowerEdge server models including the embedded iDRAC. This will not provide the license level.Identify iDRAC version using the iDRAC Web Interface
Log in to the iDRAC interface. The default iDRAC IP address 192.168.0.120. Upon login, the version is displayed at the upper left of the iDRAC along with the iDRAC license level.
Figure 1: iDRAC9
Figure 2: iDRAC8
In addition to the version of iDRAC embedded in the PowerEdge server model, iDRAC features are available based on the license level. Additional information on licensing is available in the Support for Integrated Dell Remote Access Controller 7 (iDRAC7) , Support for Integrated Dell Remote Access Controller 8 (iDRAC8) , and Support for Integrated Dell Remote Access Controller 9 (iDRAC9) ; Licensing section.
Cause
Dell
Resolution
Dell Technologies
Products
DRAC4, DRAC5, iDRAC6, iDRAC7, iDRAC8, iDRAC9Article Properties
Article Number: 000177885
Article Type: Solution
Last Modified: 14 Mar 2023
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.