Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

iDRAC7:更換主機板後使用的 Enterprise 授權公用程式

Summary: 本文說明如果更換 PowerEdge 第 12 代伺服器上的系統主機板,如何還原 iDRAC7 Enterprise 授權。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms


如果要更換 PowerEdge 第 12 代伺服器上的系統主機板,則所有現有的 iDRAC7 Enterprise 授權都必須安裝在更換的主機板上,才能重新啟用 iDRAC7 Enterprise 功能。

由於在更換主機板後沒有立即有效的授權,因此在重新安裝 Enterprise 授權之前,iDRAC7 專用的網路介面卡連接埠不會啟動或啟用。

Cause

不需要

Resolution


如果需要試用授權才能啟用 iDRAC7 Enterprise 功能,則在更換主機板後,現在即可使用 iDRAC7 Enterprise 授權公用程式。

提供此公用程式作為無人值守資料中心及無法存取永久授權檔案情況的因應措施。

此公用程式必須在受影響的伺服器上本機使用,並允許安裝 30 天試用授權,才能啟動專用 NIC 連接埠。
 
注意:Dell 服務提供者 (DSP) 不需要安裝或設定 iDRAC7 授權。在更換系統主機板之前或之後,任何 iDRAC7 授權的備份或還原均為客戶的責任。

工具下載:
注意:每個伺服器僅可使用此公用程式一次。

Affected Products

Enterprise Systems Management, Remote Enterprise Systems Management, iDRAC7, PowerEdge FM120x4 (for PE FX2/FX2s), PowerEdge M420, PowerEdge M520, PowerEdge M520 (for PE VRTX), PowerEdge M620, PowerEdge M620 (for PE VRTX), PowerEdge M820 , PowerEdge M820 (for PE VRTX), PowerEdge R220, PowerEdge R320, PowerEdge R420, PowerEdge R420XR, PowerEdge R520, PowerEdge R620, PowerEdge R720, PowerEdge R720XD, PowerEdge R820, PowerEdge R920, PowerEdge T320, PowerEdge T420, PowerEdge T620 ...
Article Properties
Article Number: 000137429
Article Type: Solution
Last Modified: 14 Aug 2024
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.