RecoverPoint for VMs: 5.3 SP4, programrettelse 1, understøttelse af UEFI Secure Boot

Summary: RecoverPoint for Virtual Machines (VMs) 5.3 SP4, programrettelse 1 (5.3.4.1) understøtter som standard ikke sikker start i Unified Extensible Firmware Interface (UEFI). I denne artikel forklares begrænsningerne og de tilgængelige indstillinger. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

RecoverPoint for VMs 5.3 SP4 Patch 1 Splitter vSphere Installation Bundle (VIB) kan ikke installeres, når Sikker start er aktiveret.

Test af sikker opstart med fordelerinstallationen viser denne fejl:

[root@vApp13-esx-100:~] /usr/lib/vmware/secureboot/bin/secureBoot.py -c
Secure boot CANNOT be enabled
: Failed to verify signatures of the following vib(s): [RP-Splitter]. All tardisks validated. All acceptance levels validated


Fejl på ESXi-værten (/var/run/log/esxupdate.log) ved implementering af splitteren: 

Could not stage image profile '(Updated) ESXi-6.5.0-2018050xxx-standard': ('EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000', "('EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000', 'The VIB EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000 does not contain a signature.')")"" reporting on the VC tasks.


Installationen af RecoverPoint for VMs 5.3 SP4 Patch 1 mislykkes ved 53 %, hvis værterne er i tilstanden Sikker start.
Fejlen i Installationsstyring:

Installation has failed. Review the error messages below to identify the cause.

Installing vRPAs cluster, and verifying all vRPAs are attached. (x)
could not deploy ESX splitter.

Cause

RecoverPoint for VMs 5.3 SP4, programrettelse 1, splitter VIB RPESX-00.5.3.4.1.0.m.184.000 er ikke signeret.
Secure Boot understøttes ikke med denne fordelerversion.

Resolution

RecoverPoint for VMs 5.3 SP4, programrettelse 1, splitter VIB RPESX-00.5.3.4.1.0.m.184.000 er ikke signeret og understøtter ikke sikker opstart.

  • Sikker start understøttes ikke til vSphere 8.0-miljøer med programrettelse 1 til RecoverPoint for VMs 5.3 SP4. 
  • Sikker startunderstøttes med RecoverPoint for VMs 5.3.4.0 Splitter til vSphere 7.0.x-miljøer med RecoverPoint for VMs 5.3 SP4, programrettelse 1.

Løsning til vSphere 8.0.x:

  • Deaktiver sikker start på ESXi-værter.
  • Installer RecoverPoint for VMs 5.3 SP4, programrettelse 1-splitteren med --no-sig-check Mulighed:
esxcli software vib install -v /<Full_path_to_vib_file> --no-sig-check


Løsningsmuligheder for ældre vSphere-versioner:
For vSphere 6.x - og vSphere 7.0.x-vSphere-miljøer skal du følge en af disse indstillinger:

Se side 29 i udrulningsvejledningen "Installer splitteren med VIB-installationsprogrammet til RecoverPoint for VMs".

Additional Information

Dette gælder for RecoverPoint for VMs 5.3 SP3, programrettelse 3 VIB – EMC_bootbank_RP-Splitter_RPESX-00.5.3.3.3.0.m.176.000.vib.

RecoverPoint for VMs 6.0.x med VMware vSphere API'er (Application Programming Interfaces) til I/O-filtrering (VAIO) Splitter understøtter fortsat sikker start.

Affected Products

RecoverPoint for Virtual Machines
Article Properties
Article Number: 000225918
Article Type: Solution
Last Modified: 20 Dec 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.