Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

The Features of the Dell Micro Form Factor All-in-One Stand MFS22

Summary: The following article provides information about the Dell Micro Form Factor All-in-One Stand (MFS22).

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions


Table of Contents:

  1. Introduction
  2. Features
  3. Assembly
  4. Range of Movement
  5. Supported Systems

 

Introduction

 

Stand with no Monitor or Computer Stand with Monitor and Computer

(Figure.1 and 2 Dell Micro Form Factor All-in-One Stand with/without the monitor and computer attached)

If you are looking to maximize your productivity, then you should look at this Dell Micro Form Factor All-in-One Stand – MFS22.

The MFS22 supports mounting your micro computer and one monitor. You can easily secure your Desktop and Dell monitor with an all-in-one stand with effortless setup and a cable management system for a clean workspace. You can easily install your Dell UltraSharp or P-Series monitors via the Quick Release. It easily mounts selected OptiPlex Micro, computers on the monitor with virtually no tools. The integrated cable management slot with clips can hold cables which helps to keep your desk neat and uncluttered.

You can locate further information about the MFS22 Micro Form Factor All-in-One Stand on the following link:

 

You can search the Dell Shop for the MFS22 to find out information such as the price.


Back to Top


 

Features

 

Product Type Desktop Stand (Lockable)
Color Silver
Installation Freestanding
Panel Mount Dell Quick Release Mount
VESA compliant Monitor Mount
VESA Adapter Plate Mount Sets included
System Mount Select OptiPlex Micro models
VESA Mounting Interface 100 x 100 mm (3.9 x 3.9")
Supported Weight 5.8 kg (12.8 lbs)
Recommended Use 1 LCD Flat Display
Recommended Display Size 19 to 27"
Cable Management Slots in upper and lower arms for cables
 


Back to Top


 

Assembly

 

Note: The adapter plate, screws, spacers, thumbscrew, and cable cover ship in the box.

What's in the box

(Figure.3 In the Box)

 

Assembly Steps:

  1. The desk stand is freestanding on the desk and locks to the stand arm from under the stand.

    Desk Mount

    (Figure.4 Desk stand)

  2. Screw and tighten the mounting bolts into the base of the micro computer.

    Mounting Screws

    (Figure.5 Mounting screws)

  3. Locate the mounting screws into the computer plate on the stand and push down to secure the computer to the stand.

    Mount the Computer

    (Figure.6 Mount the computer)

  4. Route the computer and monitor cables through the slot in the stand and into the computer. (Leave the monitor cables free until the monitor has been fitted.)

    Route the Cables

    (Figure.7 Route the cables)

  5. Slide the security cable cover over the cables connected into the computer.

    Fit Cable Cover

    (Figure.8 Cable cover)

  6. Lock the slide latch under the front of the computer.

    Securing Latch

    (Figure.9 Slider Lock)

  7. Using an optional padlock and the hasp on the stand, you can lock the computer in place.

    Security Lock

    (Figure.10 Security Lock)

  8. Locate the monitor onto the monitor arm of the stand.

    Locate the Monitor

    (Figure.11 Fit the monitor)

  9. Use the hooks on the back of the cable cover to take up any slack in the monitor cabling.

    Cable Hooks

    (Figure.12 Cable hooks)

  10. Plug up your Monitor cables

    Attach the Cables

    (Figure.13 Attach cables)


Back to Top


 

Range of Movement

 

Do not swivel to Portrait

(Figure.14 Do Not attempt to swivel to Portrait from Landscape)

Monitor Quick Release

(Figure.15 Monitor Quick Release)

Movement  Height adjustable, Swivels, Tilts, and Pivots
Pivot 180° rotation
Lift 150 mm (5.91")
 


Back to Top


 

Supported Systems

 

Supported Platforms
OptiPlex 3000 SC (micro)
OptiPlex 3000 (micro)
OptiPlex 5000 (micro)
OptiPlex 7000 (micro)


Back to Top


Affected Products

Dell Micro Form Factor All-in-One Stand MFS22, OptiPlex 3000 Small Form Factor, OptiPlex 3000 Thin Client, OptiPlex 5000 Small Form Factor, OptiPlex 7000 Small Form Factor
Article Properties
Article Number: 000197379
Article Type: How To
Last Modified: 16 Oct 2024
Version:  9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.