Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Kaby Lake Systems with USB Type-C DP Only (non-Thunderbolt) Connections Using WD15 or DS1000 May Have Blanking External Video

Summary: This article explains what to do if your Latitude system shows blank or flickering video on external monitors connected using a USB-C DisplayPort (DP) Adapter.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

If you are using a Kaby Lake-based system with USB Type-C DisplayPort (non-Thunderbolt) connections and a WD15 or DS1000 dock, it may happen that your external monitors are blanking or flashing. This may only occur when a hardwired network connection is attached to the dock.

Cause

Current List of systems this might occur on

  • Latitude 7x80 (non-Thunderbolt configuration)
  • Latitude 5x80 (non-Thunderbolt configuration)
  • Latitude 5289 and 7389
Note: This does not affect the internal LCD screen and does not occur on systems with a Thunderbolt (Alpine Ridge) controller. This also does not occur on Skylake based systems.

Resolution

Verify that the Firmware Update version 1.0.0.8 is installed. This firmware is not the solution to the problem but must be updated for Kaby Lake systems. It is available on the Drivers and Download Website of the applicable systems and the WD15 download section.

There are two options available as a solution for this problem. You can either download the latest Realtek USB GBE Ethernet Controller Firmware Utility from the Drivers and Download Website or follow the manual steps below. These two options disable Selective Suspend for the Ethernet Adapter.

Manual steps (Figure 1):

  1. Open the Device Manager (right-click the Windows Button and click Device Manager)

  2. Expand the category Network Adapters

  3. Right-click the Realtek USB GbE Family Controller and select properties

  4. Click the Advanced tab

  5. Select "Selective suspend" in the menu and set the Value to "DISABLED."

  6. Press OK and reboot the system.

SLN306731_en_US__2selective-suspend-usb-ethernet-EN
Figure 1: Steps to disable Selective Suspend.

Affected Products

Dell Dock WD15, Dell Dock with Monitor Stand DS1000, Latitude 5289 2-in-1, Latitude 7280, Latitude 5480/5488, Latitude 7480, Latitude 5580
Article Properties
Article Number: 000142885
Article Type: Solution
Last Modified: 23 Jul 2024
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.