Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Interposer Card Only Detects One Solid State Drive (SSD)

Summary: Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. Only a single SSD drive was detected.

SLN301728_en_US__1PCIe-Interposer
 


Cause

This issue is caused by which slot the interposer card is installed in. The Precision Tower 5810, 7810, 7910 systems are equipped with multiple PCIe slots that will accept x16 PCIe form factor cards, however some of these PCIe slots are wired as PCIe x4, not PCIe x16.
If the slot is wired as PCIe x4, then only one SSD on the interposer card will be detected.

Resolution

Move the interposer card to a true x16 PCIe slot.
 
Note: PCIe SSD M.2 Interposer cards installed by Dell from the factory are installed in x16 wired PCIe slot.

Affected Products

Precision Rack 7910, Precision Tower 5810, Dell Precision Tower 7810, Precision Tower 7910
Article Properties
Article Number: 000137329
Article Type: Solution
Last Modified: 30 Sept 2021
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.