Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

BitLocker prompting for recovery key after Motherboard Replacement

Summary: BitLocker prompting for a recovery key after a motherboard replacement? Follow this guide to fix the issue, including suspending BitLocker and adjusting TPM settings.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Affected Operating Systems:

  • Windows 10
  • Windows 11

After the motherboard is replaced in a computer with BitLocker enabled and active, the computer will prompt for a Recovery Key at boot.

Cause

This is working as designed. BitLocker causes this message by retaining the hardware key of the original motherboard, and the mismatch prompts for the Recovery Key. This is a result of not suspending or disabling BitLocker before the hardware change.

BitLocker Recovery Key Required After Motherboard Replacement on TPM-Enabled Dell Computers

If Your Trusted Platform Module (TPM) enabled Dell computer has a motherboard replaced due to a no Power on Self-Test (POST) issue and you have BitLocker enabled within the operating system, you are required to enter their BitLocker Recovery key when booting to the operating system.

Note:
  • The BitLocker Recovery key may be enabled automatically after the motherboard replacement. For information about recovering or saving the BitLocker Recovery key, reference the following Dell Knowledge Base article: BitLocker is prompting for a Recovery key and you do not have the BitLocker key. If the motherboard is being replaced on your computer but the computer still boots to the operating system, it is advised that you find your BitLocker Recovery key before the motherboard replacement. If your computer is equipped with the Trusted Platform Module (TPM) capability, it is also advised that you decrypt the hard drive before the motherboard replacement following the steps provided in the following Dell Knowledge Base Article: Automatic Windows Device Encryption/BitLocker on Dell Systems
  • This does not require an operating system reinstall or a hardware replacement.
  • Microsoft instructions on how to: Find my BitLocker recovery key This hyperlink is taking you to a website outside of Dell Technologies.

Resolution

Windows 10 or Windows 11

  1. After you sign in with your BitLocker Recovery Key, you must go to the BitLocker manager. (Control Panel > System and Security > BitLocker Drive Encryption)
  2. From the Manage BitLocker window, choose to Suspend protection.
    Windows 10 or Windows 11 Suspend protection of BitLocker from BitLocker manager console
  3. Confirm the decision to suspend BitLocker, if prompted.
  4. A message should appear stating that BitLocker protection has been suspended.
  5. Turn the computer on and go into the BIOS and enable the TPM and activate it. Apply and Exit. (Choose the BIOS layout for your computer from the three configurations below):
    BIOS configuration screen
    BIOS configuration screen
    BIOS configuration screen
  6. Boot back into the operating system (you may be prompted for the Recovery key once more).
  7. Go back to the BitLocker manager console and ensure that BitLocker is turned back on.

Additional Information

Article Properties
Article Number: 000131541
Article Type: Solution
Last Modified: 29 Jul 2024
Version:  11
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.