참고: 이 문서는 서버 튜토리얼
여기에서 "
RAID 및 디스크"를 사용할 수 있습니다.
다음 단계는 운영 체제에 공통으로 모두 적용됩니다.
목차:
1. OMSA를 통한 오프라인 지정
2. 명령줄 인터페이스(CLI)를 통한 오프라인 지정
OMSA을 통한 오프라인 지정
- OMSA에 로그인합니다.
보안 인증서 경고 메시지가 표시되는 경우 Continue to this website를 클릭합니다.
- 왼쪽 트리 메뉴에서 Storage를 확장하여 Virtual Disks를 선택합니다.
- 가상 디스크 목록에서 원하는 가상 디스크 이름을 클릭합니다.
이 단계에서는 Virtual Disk0을 예로 선택합니다.
- 삭제할 물리적 디스크의 사용 가능한 작업 메뉴에서 Offline을 선택하고 Execute를 클릭합니다.
- 표시되는 주의 메시지를 확인하고 Offline을 클릭합니다.
- 메시지의 웹 페이지 상자에서 OK를 클릭합니다.
- 선택한 물리적 디스크가 현재 오프라인 상태인지 확인합니다.
명령줄 인터페이스(CLI)를 통한 오프라인 지정
다음 단계를 실행하려면 시스템에 OMSA를 설치해야 합니다.
- Terminal(Linux) 또는 DOS 창(Windows)을 엽니다.
- 다음 명령을 실행합니다.
omconfig storage pdisk action=offline controller=* pdisk=*
(*는 숫자입니다).
다음 명령을 실행합니다. omreport storage controller
컨트롤러 목록을 확인하면.
예: 컨트롤러 ID=0, 원하는 물리적 디스크 ID=0:1:4
omconfig storage pdisk action=offline controller=0 pdisk=0:1:4
중요: 정상 작동하는 컨트롤러를 선택하는 것이 중요합니다.
- "Command successful!"이라는 메시지가 표시되면 이제 물리적 디스크가 오프라인 상태입니다.
- 다음 명령을 실행합니다.
omreport storage pdisk controller=* pdisk=*
이제 물리적 디스크 상태가 "오프라인"으로 표시되는지 확인합니다(*가 숫자가 됨).