Alienware m15 and Alienware m17 (R2, R3, and R4) Indent on venting cover under the C cover
Summary: This article provides information about an indent on the screen bezel. This indent is on purpose and is part of the design.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
This impacts every Alienware m15 R2, R3, and R4 and Alienware m17 R2, R3, and R4 laptops with or without the Tobii Camera configuration. The black top venting cover has an indent under the center of the LCD, close to the hinge.
Affected Platforms:
- Alienware m15 R2
- Alienware M15 R3
- Alienware m15 R4
- Alienware m17 R2
- Alienware M17 R3
- Alienware m17 R4
Cause
Dell engineering has confirmed that the purpose of this indent is to provide space for the Tobii Camera. Laptops that are shipped with the Tobii camera need the indent for when the laptop is closed. The same cover is used if you purchase the laptop with or without the Tobii camera. That means this indent is found on all these laptops.
Resolution
This indent is designed into the plastic. There is no fault with the plastics.
Affected Products
Alienware M15 R2, Alienware M15 R3, Alienware m15 R4, Alienware M17 R2, Alienware M17 R3, Alienware m17 R4Article Properties
Article Number: 000132247
Article Type: Solution
Last Modified: 11 Sept 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.