VxRail: How to reset the BIOS settings to default and set system time and date.
Summary: This article details how to reset the system BIOS to default settings and how to set the system time and date within the BIOS.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
How to reset the BIOS to default settings:
1. Place the node in Maintenance Mode with Ensure Accessibility.
2. Log in to the iDRAC of the node as root and launch the virtual console.
- Alternatively access the node locally using a keyboard and monitor.
3. Reboot the node using vCenter, CLI, or iDRAC power controls.
4. Within the iDRAC virtual console, as the node is going through POST enter System Setup by pressing the F2 key.
-Alternatively select the Boot option at the top of the virtual console. Select the BIOS Setup before rebooting the node to allow it to boot to System Setup upon the next boot without requiring F2 keyboard input.
5. From the System Setup page within the iDRAC virtual console, select System BIOS.
6. From the System BIOS page select Defaults, then select Yes in the 'Load Default Settings' warning window.
.
How to set system time and date:
Follow above steps up to step 5.
1. Within System BIOS, scroll down using the bar on the right side of the page, then select Miscellaneous Settings.
2. Click on the System Time or System Date value to adjust the time or date.
3. Once the value is set properly click OK to save the new time or date value, changes take effect immediately.
4. Once the System Time and System Date are set properly, click the Back button in the bottom-right corner.
5. Click Finish in the bottom-right corner to exit System BIOS, then click Finish again to exit System Setup and allow the system to boot.
Additional Information
Affected Products
VxRailProducts
VxRail Appliance Family, VxRail Appliance SeriesArticle Properties
Article Number: 000211069
Article Type: How To
Last Modified: 14 Nov 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.