[Avamar] - How to create/modify/verify Unity NDMP user/settings
Summary: Instructions on how to create/modify/verify Unity NDMP user/settings
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
1. Login into Unity Unisphere as admin user:
2. Navigate to the path:
Unisphere>File>NAS Servers>Select the NAS Server>Edit Icon
If the Unity is brand new, the NDMP settings page would look like the one below:
3. Complete NDMP settings will include the following:
a. "Enable NDMP" checkbox is ticked/checked
b. "ndmp" user password entered and verified
4. Verify the NDMP service/settings:
2. Navigate to the path:
Unisphere>File>NAS Servers>Select the NAS Server>Edit Icon
If the Unity is brand new, the NDMP settings page would look like the one below:
3. Complete NDMP settings will include the following:
a. "Enable NDMP" checkbox is ticked/checked
b. "ndmp" user password entered and verified
4. Verify the NDMP service/settings:
Article Properties
Article Number: 000189645
Article Type: How To
Last Modified: 05 Sept 2021
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.