Article Number: 000175541
It is often required to find out the Solid-state Drive (SSD) or Hard Drive Firmware (FW) Version to identify if a firmware update is required or not.
You can remove the drive and check the Firmware Version that is printed on the disk label. (The downside is the effort required to remove the drive.)
The easiest way is to use the following WMIC
command:
CMD
and press the enter key to open the command prompt window wmic diskdrive get caption, firmwarerevision
and press the enter key.The information should look like Figure 1.
(Figure 1: SSD or Hard Drive firmware version)
Here are some recommended articles related to this topic that might be of interest to you.
18 Apr 2024
6
How To