Precision R7910 Rack Mounted Workstation: A Visual Guide
Summary: This article provides a Visual Guide to your Precision R7910 Rack Mounted Workstation.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
No symptom information is available.
Cause
No cause information is available.
Resolution
Note: The following Dell Product is End of Life (EOL), this article will not be updated with new information, and is provided for information purposes only.
Table of Contents:
Note: For a more detailed description about each location, please go to the system manuals at Dell.com/Manuals.
1. Chassis Overview
The images below displays the inside view of the Precision rack after the front bezel and the system cover have been removed.
| 1 | Cooling Fan Array | 2 | Processor (2) |
| 3 | Memory module sockets | 4 | PCI-E Card Holder |
| 5 | Internal USB Port | 6 | Power Supply Unit (2) |
| 7 | Expansion Card Riser 3 | 8 | Network Daughter Card |
| 9 | Expansion Card Riser 2 | 10 | Expansion Card Riser 1 |
| 11 | SATA/SAS Hard Drive Backplane |
2. Front View
The image below displays the Precision rack after the front bezel has been removed.
| 1 | Power Button, Power LED | 2 | NMI button |
| 3 | System Identification Button | 4 | VGA Video Connector |
| 5 | LCD menu buttons | 6 | Slide-out Info Tag |
| 7 | LCD panel | 8 | Hard drives (up to 16) |
| 9 | vFlash media card slot | 10 | USB (2.0) Connector |
| 11 | USB management port/ iDRAC Direct | 12 | Optical CD/DVD drive (optional) |
| 13 | Tape drive slot (optional) | 14 | Quick Sync (optional) |
3. Rear View
| 1 | System Identification Button | 2 | System Identification Connector |
| 3 | iDRAC8 Enterprise Port | 4 | PCI-E Expansion Card Slots, Half-height (3) |
| 5 | Serial Connector Port | 6 | VGA Video Connector |
| 7 | USB (3.0) Connector (2) | 8 | PCIe Expansion Card Slots, Full-height (4) |
| 9 | Ethernet Connectors (4) | 10 | Power supply (PSU1) |
| 11 | Power supply (PSU2) Optional |
4. Front Bezel Removal
1. Unlock the front bezel using the supplied key.
2. Lift the release latch next to the keylock.
3. Gently pull the front bezel away from the system.
4. The removal is complete.
| Front Bezel Reassembly Steps | |
| 1 | Insert the front bezel in its slot in a downward direction and push it towards the computer. |
| 2 | Secure the release tab. |
| 3 | Lock the front bezel using the key provided. |
5. System Cover Removal
1. Locate the release latch.
2. Rotate the latch release lock counter clockwise to the unlocked position.
3. Lift the latch and slide the cover toward the back of the system.
4. Grasp the cover on both sides and lift the cover away from the system.
5. Complete.
| System Cover Reassembly Steps | |
| 1 | Place the system cover at the bottom part of the chassis first. |
| 2 | Press down on the system cover until it clicks into place. |
Affected Products
Precision Rack 7910Article Properties
Article Number: 000142250
Article Type: Solution
Last Modified: 03 Oct 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.