Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

How to Run the Dell D2720DS Monitor Self-Test

Summary: This article provides information about running the self-test on Dell D2720DS monitors.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Monitor Self-Test

The D2720DS monitor has a self-test (burn-in mode) that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, video cable, video card, drivers, or computer.


Steps for running the self-test:

  1. Disconnect all video cables from the monitor and turn off your monitor.
  2. Press and hold button 5 (Figure 1), then press the power button to turn on the monitor.
    Dell D2720DS Monitor Button
    Figure 1

    The monitor starts the self-test (burn-in mode).
  3. Carefully inspect the screen for abnormalities as the display turns to red, green, blue, black, and white automatically.
  4. Press the power button to exit the self-test.


If you do not detect any screen abnormalities while using the self-test tool, the monitor is functioning properly. Check your video cable, video card, drivers, and computer.

Affected Products

Dell D2720DS
Article Properties
Article Number: 000188983
Article Type: How To
Last Modified: 20 Sep 2024
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.