Symptoms
Unisphere GUI 显示多个 DAE 驱动器的警报:
在这一瞬间,由于后端连接环路,只连接了三个扩展柜,但显示有六个机柜。
无法使用这些驱动器创建池,如果阵列已正常运行,则池将离线。
Cause
后端布线不正确。
连接有问题:
**如下所示,DPE SPA 上的 SAS 端口 1 连接到 LCC A 端口
“B” 而不是端口“A”,而 DPE SPB SAS 端口 1 连接到最后一个 DAE 的 LCC B 端口“B”。这使得最后一个 DAE 同时连接为 1_0 和 0_2。哪个创建了一个循环?
Resolution
将连接更正为如下所示:
DAE 0_0 与 DPE 的连接:
DPE SP A SAS 端口 0
DAE 0_0 LCC A 端口 A
DPE SP B SAS 端口 0
DAE 0_0 LCC B 端口 A
DAE 1_0 与 DPE 的连接:
DPE SP A SAS 端口 1
DAE 1_0 LCC A 端口 A
DPE SP B SAS 端口 1
DAE 1_0 LCC B 端口 A
DAE 0_1 连接:
DAE 0_0 LCC A 端口 B
DAE 0_1 LCC A 端口 A
DAE 0_0 LCC B 端口 B
DAE 0_1 LCC B 端口 A
DPE - DAE 1_0 DPE — DAE 0_0 ** 请记住,如果是 UnityXT 系列,则连接到 DPE 上的 SAS 端口 0 的第一个机柜为 0_0,如果是 Unity xxx/xxxF/x50 系列,则为 0_1。DAE— DAE (0_1) 或 (1_1) 参考:
https://www.dell.com/en-ie/dt/documentation/unity-family/unity-p-unity-platforms-hardware-information-specs/05-generic-br-hwo-dae-cabling.htm
Affected Products
Dell EMC Unity, Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F
Products
Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F
, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid
...
View More
View Less