Dell Unity: Verschillende schijven in uitbreidingsbehuizingen worden weergegeven als defect (op te lossen door gebruiker)
Summary:
In dit artikel worden de symptomen en oplossingen uitgelegd van verschillende schijven die als defect worden weergegeven in een nieuw geïnstalleerde array (dit kan ook gebeuren als er
sprake is van kruisbekabeling nadat Unity is geïnstalleerd)
...
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
Unisphere GUI geeft meldingen weer voor verschillende DAE-stations:
Op dit moment waren er vanwege geluste backend-connectiviteit slechts drie uitbreidingsbehuizingen aangesloten, maar er werden zes behuizingen weergegeven.
Het is niet mogelijk om groepen te maken met deze schijven, en als de array al operationeel was, zouden de groepen offline zijn.
Cause
Onjuiste backendbekabeling.
Problematische verbinding: ** Zoals hieronder te zien is, is SAS-poort 1 op de DPE SPA aangesloten op LCC A-poort "B" en niet op poort "A" en is DPE SPB SAS-poort 1 aangesloten op de LCC B-poort "B" van de laatste DAE. Dit maakt de laatste DAE die tegelijkertijd met 1_0 en 0_2 is verbonden. Wat creëerde een lus?
Resolution
Corrigeer de verbinding als volgt:
DAE 0_0 connectiviteit met DPE:
DPE SP A SAS-poort 0
DAE 0_0 LCC A-poort A
DPE SP B SAS-poort 0
DAE 0_0 LCC B-poort A
DAE 1_0 connectiviteit met DPE:
DPE SP A SAS-poort 1
DAE 1_0 LCC A-poort A
DPE SP B SAS-poort 1
DAE 1_0 LCC B-poort A
DAE 0_1 connectivity:
DAE 0_0 LCC A-poort B
DAE 0_1 LCC A-poort A
DAE 0_0 LCC B-poort B
DAE 0_1 LCC B-poort A
DPE - DAE 1_0
DPE - DAE 0_0 ** Onthoud dat de eerste behuizing die is aangesloten op SAS-poort 0 op de DPE 0_0 is als het een UnityXT serie is en 0_1 als het een Unity xxx/xxxF/x50 serie is.