Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

SC 儲存裝置客戶通知:Dell Storage Manager 伺服器設定失敗,開啟 MPIO 時發生錯誤

Summary: 使用 Windows Server 2016 時,Dell Storage Manager 會收到開啟 MPIO 錯誤訊息。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

在 Windows Server 2016 中,設定為指示是否啟用某項功能的旗標,直到重新開機後才會設定。  在 Dell Storage Manager 中,執行伺服器設定精靈時,會顯示以下錯誤訊息,因為未設定旗標。  

開啟本機主機的 MPIO 時發生錯誤...
 

Cause

Resolution

因應措施:
  1. 首先在執行 Windows Server 2016 的系統上安裝 MPIO;
  2. 將伺服器重新開機;
  3. 驗證 MPIO 是否「安裝」:
    1. 執行 PowerShell 命令:
       get-windowsfeature multipath-io
        「Install State」必須顯示為「Installed」
    2. 在 Windows 控制台檢查 MPIO 
  4. 使用 Dell Storage Manager 並執行伺服器設定精靈。 
如果遇到上述錯誤,請重新啟動伺服器並重新運行嚮導。

解決方案:
此修正程式位於 2018 年 3 月更新 3B 程式包 KB 4088787 (為累積程式包) 中。
若要檢查是否已安裝更新,請使用 PowerShell 命令: 
Get-HotFix |ft HotfixID, InstalledOn

Affected Products

Compellent (SC, SCv & FS Series), Dell Compellent SC4020, Dell Storage SC8000, Dell Compellent Series 40, Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC5020, Dell Storage SC5020F, Dell Storage SC7020 , Dell Storage SC7020F, Dell Storage SC9000, Dell Storage SCv3000, Dell Storage SCv3020 ...
Article Properties
Article Number: 000143006
Article Type: Solution
Last Modified: 16 May 2024
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.