Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

PowerVault TL2000 / TL4000 Tape Library - How to Check the Firmware Revisions for the Tape Library and Tape Drives

Summary: This article provides information on the PowerVault TL2000 / TL4000 - How to Check the Firmware Revisions for the tape library and tape drives

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

 

SLN164146_en_US__1icon Note: This article is part of the Dell PowerVault knowledge library, available here.

 

Table of Contents:

  1. Preferred Method - Through the Remote Management Unit (RMU)
  2. Alternate Method - Through the Front Operator Control Panel (OCP)


This article provides information on the PowerVault TL2000 / TL4000 - How to Check the Firmware Revisions for the tape library and tape drives

 

Preferred Method - Through the Remote Management Unit (RMU)

The PowerVault TL2000 / TL4000 Tape Library and Tape Drive(s) firmware can be check through the following process through the RMU (Remote Management Unit) or Web Interface:

  1. If the TL2000 / TL4000 RMU has not been configured, please consult the User's Guide using the following links:

     
    1. PowerVault TL2000 User's Guide
    2. PowerVault TL4000 User's Guide

       
  2. Access the RMU / Web Interface using a web browser such as Internet Explorer®, Firefox®, or Chrome®.
  3. After you have logged into the RMU, on the front web page / interface, you'll be able to see the firmware of the library under - "Current Installed Library Firmware" (Figure 1).


    SLN164146_en_US__2RMU interface
    Figure 1 - Library Firmware Revision




 
  •  
  •  
  • Or use menu of - Monitor Library > Library Identity. Then, use the same as above to see what the firmware is for the library.
  • The tape drive firmware can be check through the following menu path:
    Monitor Library > Drive Identity > look for Firmware Revision
    Do this for each tape drive listed (Figure 2).

    SLN164146_en_US__3RMU 2
    Figure 2 - Tape Drive Firmware Revision




 

Alternate Method - Through the Front Operator Control Panel (OCP)

The firmware for the tape library and tape drive(s) can be checked through the Front Operator Control Panel (OCP), as follows:

Cause

-

Resolution

-

Affected Products

Servers, PowerVault TL2000, PowerVault TL4000
Article Properties
Article Number: 000130478
Article Type: Solution
Last Modified: 21 Sep 2021
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.