Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

如何修復 Dell EMC Force10 S4810、S4820T、Z9000、Z9500、S6000、S60、S55 和 S5000 交換器的原廠預設值

Summary: 如何修復 Dell Networking Force10 S4810、S4820t、Z9000、Z9500、S6000、S60、S55 和 S5000 交換器的原廠預設值。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions



本文說明如何修復 Dell Networking Force10 S4810 的原廠預設值。
 


重要的記憶要點 

  • 當您在堆疊中修復所有裝置時,這些裝置會處於獨立模式。
  • 當您在堆疊中修復單一裝置時,該裝置會處於獨立模式。堆疊中的其他裝置不會受到影響。
  • 當您以獨立模式修復裝置時,裝置會在修復後維持獨立模式。
  • 修復完成後,裝置會立即重新啟動電源。
 


修復原廠預設值的命令

   
修復原廠預設值會刪除現有的持續性設定 (組態、堆疊、扇出係數等),修復後,裝置會立即重新開啟電源。請謹慎操作!

 

命令

參數

FTOS# restore factory-defaults stack-unit {0-5 | all} {bootvar | clear-all | nvram}

修復並清除組態、堆疊、扇出係數等。
0-5 - 代表要原廠重設的交換器編號
all - 代表原廠重設所有交換器
Bootvar - 重設開機環境變數
Clear-all - 重設 BootVar、NvRam 和組態
NvRam - 重設 NvRam

 

HOW10777_en_US__1icon備註:此命令功能於韌體版本 8.3.3.9 中推出。您需要擁有 8.3.3.9 或更新版本的韌體,才能使用此命令選項。  

範例 

重設所有堆疊裝置的範例:
FTOS#restore factory-defaults stack-unit all nvram
**************************************************************
* Warning - Restoring factory defaults will delete the existing *
* startup-config and all persistent settings (stacking, fanout, etc.)*
* All the units in the stack will be split into standalone units. *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution !
***************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
0 Success Success
1 Success Success
2 Success Success
3 Not present
4 Not present
5 Not presentPower
Power-cycling the unit(s).
 
重設單一交換器的範例
 
FTOS#restore factory-defaults stack-unit 1 nvram
*************************************************************
*Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success
Power-cycling the unit(s)

Affected Products

PowerSwitch S4810P, PowerSwitch S5000, Force10 S55T, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, Force10 Z9000, Dell Networking Z9500
Article Properties
Article Number: 000103011
Article Type: How To
Last Modified: 16 Sep 2021
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.