Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

How To Load The Intel Rapid Storage Technology Driver To Install An Operating System On An NVMe Storage Drive

Summary: This article describes how to load the Intel Rapid Storage Technology (IRST) driver (version 17.5 or newer). IRST is required to install the Operating System on a Non-Volatile Memory express (NVMe) storage drive. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Steps to load the Intel Rapid Storage Technology driver to install the operating system on NVMe memory.

  1. Go to the Dell Drivers & Downloads web page and identify your computer:

    1. The IRST driver is located under the Storage or Serial ATA categories. Download the x64 version of the IRST driver (version 17.5 or newer) to a computer.

    2. Double-click the .exe file that you have saved to a computer.

    3. Do Not select Install, choose Extract instead.

    4. Direct the extract tool to extract the driver files to an empty bootable USB Key.

  2. Connect the Operating System Reinstallation Image (OSRI) bootable USB Key to the computer and initiate the operating system deployment by booting from the USB Key.

  3. On the Windows Setup page where the storage drives are listed, select Load Driver.

    Select where to install Windows screen

  4. Insert the second USB drive (The drive with the IRST driver files) into another USB port, if another USB port is available. (If another USB port is not available, remove the OSRI USB drive and insert the second USB drive into the same USB port.)

  5. In the Load Driver window, click Browse.

    How to Browse for the correct Driver screen

  6. In the Browse for Folder window, browse the USB drive and select the folder where the IRST driver files are available. Then click OK.

    Selecting the Folder to locate the Windows files screen

  7. In the Windows Setup window, the available driver files are listed out (iaStorAC.inf). Click Next to install the listed driver.

    Identifying and selecting the Driver screen

  8. Once the driver is installed, NVMe storage appears in the drive list, and you can continue the operating system deployment.

    Driver installation success and correct installation path confirmation screen

    In the above screenshot, we can find the Drive 2 detection which is not there in the first screenshot.

Further instructions are available to complete this installation. Select the correct operating system from those listed on the following Dell Portal Page:

Additional Information

Article Properties
Article Number: 000132969
Article Type: How To
Last Modified: 04 Oct 2024
Version:  11
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.