Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Article Number: 000141623

Imaging M.2 SSDs in Intel Skylake Chipset Systems

Summary: This article provides the steps for Imaging Windows on M.2 solid state drives in Intel Skylake chipset systems.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Symptoms

Skylake and M.2 Drives

Latitude, Precision, and OptiPlex systems with the Intel Skylake chipset may be equipped with PCIe based M.2 solid state drives. These drives require a new version of Intel Rapid Storage Driver (Version 14.5 or higher) to be accessible by the operating system and imaging tools.

M.2 is a small-form-factor (SFF) multi-purpose connector designed to replace the small mSATA and mini-PCIe slots.

Cause

No cause information

Resolution

Essential Imaging Information

Intel Rapid Storage version 14.5 is required to use PCIe based M.2 SSD drives that appear as "NVMe" disks.

The NVMe disk does not have a PCI hardware ID but is recognized by the iaStor driver.

Example: SCSI\DiskNVMe____SM951_NVMe_SAMSUBXW7

Intel Rapid Storage 14.5 is not in the Windows PE CAB files for Windows PE 3.1, 5.0, or 10 as of yet and must be downloaded from Intel directly from https://downloadcenter.intel.com/product/55005/Intel-Rapid-Storage-Technology-Intel-RST SLN300184_en_US__1iC_External_Link_BD_v1.

You must download and extract the F6 driver directly to a USB thumb drive, then boot to the Windows media and load the IRST drivers:

  1. Download the F6 driver depending on your processor (x86 for 32-bit processors, or x64 for 64-bit processors).

  2. Extract the contents of the file to your USB drive.

  3. Boot to the Windows installation media, and at the hard drive selection screen, select Load drivers.

  4. Select the appropriate driver based on your BIOS settings to display the hard drive.

  5. Proceed with the Windows installation.

The new Skylake based motherboards require Intel Rapid Storage driver 14.5.2.x or newer.

Article Properties

Affected Product

Desktops & All-in-Ones, Laptops, Alienware, Inspiron, Latitude

Last Published Date

27 Jul 2024

Version

4

Article Type

Solution

Back to Top