Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Imaging M.2 SSDs in Intel Skylake Chipset Systems

Summary: This article provides the steps for Imaging Windows on M.2 solid state drives in Intel Skylake chipset computers.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Skylake and M.2 Drives

Latitude, Precision, and OptiPlex computers with the Intel Skylake chipset may be equipped with PCIe based M.2 solid state drives. These drives require a new version of Intel Rapid Storage Driver (Version 14.5 or higher) to be accessible by the Operating System and imaging tools.

M.2 is a small-form-factor (SFF) multi-purpose connector designed to replace the small mSATA and mini-PCIe slots.

Cause

No cause information is available.

Resolution

Essential Imaging Information

Intel Rapid Storage version 14.5 is required to use PCIe based M.2 SSD drives that appear as "NVMe" disks.

The NVMe disk does not have a PCI hardware ID but is recognized by the iaStor driver.

Example: SCSI\DiskNVMe____SM951_NVMe_SAMSUBXW7

Intel Rapid Storage 14.5 is not in the Windows PE CAB files for Windows PE 3.1, 5.0, or 10 as of yet and must be downloaded from Intel directly from https://downloadcenter.intel.com/product/55005/Intel-Rapid-Storage-Technology-Intel-RST This hyperlink is taking you to a website outside of Dell Technologies..

You must download and extract the F6 driver directly to a USB thumb drive, then boot to the Windows media and load the IRST drivers:

  1. Download the F6 driver depending on your processor (x86 for 32-bit processors, or x64 for 64-bit processors).
  2. Extract the contents of the file to your USB drive.
  3. Boot to the Windows installation media, and at the hard drive selection screen, select Load drivers.
  4. Select the appropriate driver based on your BIOS settings to display the hard drive.
  5. Proceed with the Windows installation.

The new Skylake based motherboards require Intel Rapid Storage driver 14.5.2.x or newer.

Back to Top

Affected Products

OptiPlex, Latitude, Fixed Workstations, Mobile Workstations
Article Properties
Article Number: 000141623
Article Type: Solution
Last Modified: 09 Oct 2024
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.