Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

如何在 7000、8000、8100、M6220、M6348、M8024-K N2000、N3000 和 N4000 系列交换机上执行接口范围命令

Summary: 如何在 Dell n 系列 PowerConnect 交换机上设置接口范围命令

This article applies to   This article does not apply to 
Check out resources for

Instructions



文章摘要：本文介绍如何同时配置多个接口。

 

要同时配置多个接口，必须进入接口范围命令。


运行以下命令以进入各种接口。

console>enable

console#configure

对于连续端口，以下示例在设备 1 上使用千兆位以太网端口 1-5

console(config)#interface range gi1/0/1-5

对于非连续端口，以下示例在设备 1 和 2 上使用千兆位以太网端口 48

console(config)#interface range gi1/0/48,gi2/0/48

 

注：请注意，从 range 后面开始，在两个示例的其余命令语法中再也没有空格
 
注：要验证端口在您交换机上的定义方式，可运行 console#show interfaces status


下面是配置连续端口 1 到 5 以及 8 和 9 的示例。

console(config)#interface range gi1/0/1-5,gi1/0/8,gi1/0/9

 

注：您可以同时配置不同的接口类型，如千兆位以太网和10千兆位以太网接口

 

Affected Products

PowerSwitch N3000 Series, PowerConnect 7024, PowerConnect 7024F, PowerConnect 7024P, PowerConnect 8024, PowerConnect 8024F, PowerConnect 8100 Series, PowerConnect M6220, PowerConnect M6348, PowerConnect M8024, PowerConnect M8024-K
Article Properties
Article Number: 000121674
Article Type: How To
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.
Article Properties
Article Number: 000121674
Article Type: How To
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.