Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

PowerVault ME4: How to enable SupportAssist

Summary: This article outlines what the integrated SupportAssist service on PowerVault ME4 is and explains the benefits of using this feature of the array.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

1. What is SupportAssist on PowerVault ME4?

SupportAssist is an embedded feature that helps you proactively maintain the health of your PowerVault ME4 storage array or other Dell EMC storage, server, and networking devices. In addition, SupportAssist is required to access and use CloudIQ, a no-cost cloud-based storage analytics application.
When SupportAssist is enabled and an issue is detected, resolution is kick-started as automatic notifications and the necessary diagnostic information is sent to Dell EMC for troubleshooting. Dell EMC technical support contacts you with a resolution, preventing issues from becoming costly problems. Users who combine SupportAssist with ProSupport Plus resolve issues 72% faster.

Personal or business data is not collected in this process. SupportAssist only collects system state information including configuration, event notifications, and system diagnostic information. With SupportAssist, your information is safe during transport and storage. Data is transported securely with 256-bit encryption, secure web ports, and using a firewall with protected one-way communication from your site to Dell EMC while your device usage and login credentials are never collected or leave your site.

2.Enabling SupportAssist

SupportAssist can be enabled in the PowerVault Manager web interface or the command-line interface (CLI). When enabled, you agree to allow SupportAssist to remotely monitor the storage system, send diagnostic information, and transmit the telemetry data to a remote support server. Each time SupportAssist runs, a service tag is sent that includes a unique identifier for your system. This identifier can be used to contact you if your system needs repair.

What features of SupportAssist are available with Basic Hardware Support, ProSupport and ProSupport Plus?

Comparison of some Dell support service offerings

Figure 1 - Comparison of some Dell support service offerings. For additional service details, see your warranty contract. 

SupportAssist is disabled by default. To enable SupportAssist in PowerVault Manager, perform the following steps:
  1. Start a supported web browser and sign in to PowerVault Manager.
  2. On the Home topic, select Action > System Settings. The System Settings dialog box is displayed.
    Configuring SupportAssist wizard
  3. Click the Network tab in the System Settings dialog box and configure both controllers with DNS server.Configure controllers with DNS server
  4. Click the SupportAssist tab in the System Settings dialog box.
    Configuring SupportAssist wizard
  5. Select the SupportAssist check box. The SupportAssist agreement is displayed.
    Configuring SupportAssist wizard
  6. Read through the SupportAssist agreement and click Accept to acknowledge the agreement.
  7. In the Contact Information tab, enter the primary contact information and select the preferred contact settings.Configuring SupportAssist wizard
  8. Click Apply.
For instructions on using the CLI to enable SupportAssist, see the Dell EMC PowerVault ME4 Series Storage System CLI Guide on www.dell.com/support.

3.Web Proxy Server Option

If you are using a proxy server to connect to the Internet, perform the following steps to enable the Web Proxy Server option for SupportAssist:
  1. On the SupportAssist tab in the System Settings dialog box, click the Web Proxy tab.
  2. Select the Web Proxy check box.
    Configuring SupportAssist wizard
  3. Type the hostname or IP address of the web proxy server in the Host field.
  4. Type of the port number of the web proxy server in the Port field.
  5. If the web proxy server requires authentication, type the proxy server credentials in the User Name and Password fields.
  6. Click Apply.

4.Diagnostics

SupportAssist collects diagnostic information from the PowerVault ME4 and transmits it to Dell.
Configuring SupportAssist wizard

The diagnostic information that is collected by SupportAssist includes configuration information, user-supplied contact information, names of data volumes, IP addresses, access control lists, diagnostics and performance information, network configuration information, host or server configuration, and array performance information.

The event information that is collected by SupportAssist includes error and critical event messages, event IDs, event codes, timestamps, and component identifiers. Log data information includes current configuration state of the storage system, the XML API dump of the system, the event log, and the full debug log. The log information that is collected by SupportAssist is the same information that is gathered by selecting the Save Logs option in PowerVault Manager.

DNS servers and ports that are used by PowerVault ME4 integrated SupportAssist service. 

For firewall configuration SupportAssist service connects to the following endpoints on outgoing TCP port 443.

Ensure that DNS services are configured to provide domain name resolution.
Dell SupportAssist
Comments Hostname Public IP Address TCP Port
  stor.g3.ph.dell.com 143.166.135.19 443
Expires June 30, 2023    web1.compellent.com 76.164.8.136 443
Starting June 30, 2023 stor.g3.ph.dell.com / web1.compellent.com      Primary 143.166.135.19  443
  stor.g3.ph.dell.com / web1.compellent.com Secondary 143.166.147.73  443

What is CloudIQ service?

Dell CloudIQ is an online software as a service portal that administrators can use to monitor the health of their Dell systems.   Users can sign up using their Dell support business accounts to https://cloudiq.dell.com and onboard the PowerVault ME4.   The CloudIQ telemetry data is sent to Dell using SupportAssist.   For specific details see CloudIQ: General Procedures to Onboard PowerVault ME Series Arrays to CloudIQ

SupportAssist will not connect to Dell endpoints, or CloudIQ telemetry uploads fail.

To resolve these symptoms, follow the steps in the following article CloudIQ: ME4 - How to troubleshoot CloudIQ upload failures

Affected Products

Dell EMC PowerVault ME4012, Dell EMC PowerVault ME4024, Dell EMC PowerVault ME4084
Article Properties
Article Number: 000054807
Article Type: How To
Last Modified: 23 Jan 2024
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.