Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
Sign In Create an Account Premier Sign In Partner Program Sign In
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

How to Access the UEFI and BIOS Firmware Setup Screens with Microsoft Windows 10 and 11

Summary: The following article provides information about accessing the Unified Extensible Firmware Interface (UEFI) or BIOS with Microsoft Windows 10 or 11 on a Dell computer.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

The Windows 11, and Windows 10 operating systems allow you to boot into the UEFI BIOS firmware setup on supported Dell computers. You can use the integrated advanced startup options.

NOTE: Some Dell computers may not support this feature because the UEFI and Serial ATA (SATA) settings cannot be changed in the BIOS.
|

  1. Turn on the computer.
  2. At the Dell logo, tap the F2 key several times.

The images in this article are displayed in English for illustration purposes only.

  1. Click Start and then select Settings.
  2. Click Update & Security.

    Windows Settings

  3. On the left side, click Recovery.
  4. Under Advanced start-up, click Restart Now.

    Windows 10 Recovery

  5. Click Troubleshoot.

    Windows 10 Troubleshoot

  6. Click Advanced options.

    Windows 10 Advance Startup

  7. Select UEFI Firmware Settings.

    Windows 10 EFI Settings

  8. Click Restart to restart the computer and enter UEFI. (BIOS)
Note: If your operating system has become corrupted, you cannot go further than the Windows sign in screen. However, there is still an opportunity to enter the Advanced Options from the sign-in screen.

  1. Boot to the sign-in screen.

  2. Click the Power button on the sign-in screen.

  3. Press and hold down the Shift key and click Restart.

  4. Select UEFI Firmware Settings.

Additional Information

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Affected Products

Alienware, Inspiron, Legacy Desktop Models, OptiPlex, Vostro, XPS, G Series, G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Legacy Laptop Models, Fixed Workstations, Mobile Workstations
Article Properties
Article Number: 000126121
Article Type: How To
Last Modified: 10 Oct 2024
Version:  14
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.