1100 and 1110 |
No options available |
1125 |
Reset NVRAM
- Use the Right/Left arrows to navigate, use the checkmark to select your option.
- Press the Right/Left arrow until you see "Setup" and press the checkmark.
- Press the Right/Left arrow until you see "Clear Settings" and press the checkmark.
- Press the checkmark on "All Settings".
|
1130 / 1130N |
Reset NVRAM/Network
- Open a web browser and enter your machine’s IP address.
- When the EWS window opens, click "Network Settings".
- Click "Reset".
- Click "Clear" for network.
- Turn off and restart machine to apply settings.
|
1133 / 1135n |
Reset NVRAM
- First, enter Tech Mode:
- 1133
- While in "Ready", press Menu, ID Copy, Left, Right, Menu, Back
- 1135
- While in "Ready", press Menu, #, 1, 9, 3, 4, Menu
- From there, press Left/Right to "Data Setup".
- Press Left/Right to "Clear All Mem".
- Press OK.
|
1230c |
No options available |
1235cn |
Reset NVRAM / Network / Other Settings
- Press Menu until "System Setup" appears on the bottom line of the display and press OK.
- Press the Left/Right arrow until "Clear Settings" appears and press OK.
- Press the Left/Right arrow until the item you want to clear appears.
- "All Settings" - Clears all of the data stored in memory and resets all of your settings to the factory default.
- "Fax Setup" - Restores all of the fax options to the factory default.
- "Copy Setup" - Restores all of the copy options to the factory default.
- "Scan Setup" - Restores all of the scan options to the factory default.
- "System Setup" - Restores all of the system options to the factory default.
- "Network Setup" - Restores all of the network options to the factory default.
- "Address Book" - Clears all of the fax number and email address entries stored in memory.
- "Sent Report" - Clears all records of sent faxes and emails.
- "Fax RCV Report" - Clears all records of received faxes.
- Press OK when "Yes" appears.
- Press OK again to confirm clearing.
- Repeat steps 3 through 5 to clear another item.
- Press Stop/Clear down arrow to return to "Ready" mode.
|
1250c |
Reset NVRAM
Warning: Never attempt to turn off the printer. The printer will cease to function. The printer restarts automatically to apply the settings and prints the printer settings and device settings pages.
- Turn off the printer.
- Open the rear cover.
- While holding down the Start (w) and the Cancel (X) buttons at the same time, turn on the printer.
- After the Orange LED on the Ready/Data indicators go out, release the Start (w) and Cancel (X) buttons.
- Close the rear cover to initialize the non-volatile memory (NVM).
- Check if the factory settings are restored by referring to the "Printer Settings" and "Device Settings" pages.
|
1320c |
Reset NVRAM
- Turn off the printer
- Open the toner door on the printer
- While holding down both the Continue (w) and Cancel buttons turn the printer back on (lights will cycle a few times).
- Release the Continue button and Cancel buttons
- Close the toner access cover.
|
1350cnw / 1355cnw |
Reset NVRAM/Network/Other Settings System Settings
- Press the Menu button.
- Press Down to "System" and press checkmark.
- Press Down to "Admin Menu" and press checkmark.
- Press Down to "Maintenance" and press checkmark.
- Press Down to "Initialize NVM" and press checkmark.
- Press Down until the desired setting is highlighted, and press checkmark.
- "Reset Defaults and Restart Printer" - initializes the system parameters.
- "Reset Defaults of User (Fax) Section" - initializes the fax number entries in the Address Book.
- "Reset Defaults of User (Scan) Section" - initializes the e-mail and server address entries in the Address Book.
- Press Down to "Yes" and press checkmark.
- The printer restarts automatically to apply the settings.
Wired Network Settings
- Press the Menu button.
- Press Down to "System" and press checkmark.
- Press Down to "Admin Menu" and press checkmark.
- Press Down to "Network" and press checkmark.
- Press Down to "Initialize NVM" and press checkmark.
- Press Down to "Yes" and press checkmark.
- The printer restarts automatically to apply the settings.
Wireless Network Settings
- Press the Menu button.
- Press Down to "System" and press checkmark.
- Press Down to "System" and press checkmark.
- Press Down to "Admin Menu" and press checkmark.
- Press Down to "Network" and press checkmark.
- Press Down to "Reset Wireless" and press checkmark.
- Press Down to "Yes" and press checkmark.
- The printer restarts automatically to apply the settings.
|
1600n |
Reset NVRAM/Network/Other Settings System Settings
- Press the Menu button until "Maintenance" appears.
- Press Right to "Clear Settings" and press Select.
- Press Right to "All Settings" and press Select.
- Press the Return button.
Network Settings
- Press the Menu button until "Network Setup" appears.
- Press Right to "Reset NIC" or "Clear Settings" and press Select.
- Press Right to "Yes" and press Select.
- Press the Return button.
|
1700 / 1700n / 1710 / 1710n / 1720 / 1720dn |
Reset NVRAM
- Turn off the printer.
- Open the access cover to the printer.
- While holding down both the Continue (arrow) and Cancel buttons, turn the printer back on.
NOTE: The lights will cycle a few times.
- After the error light turns on solid and stays on, release the Continue (w) and Cancel (X) buttons.
- Close the access cover.
|
1815dn |
Reset NVRAM/Network System Settings
- Press Left/Right to "Menu" and press checkmark.
- Press Left/Right to "Maintenance" and press checkmark.
- Press Left/Right to "Clear Settings" and press checkmark.
- Press Left/Right to the option you want to clear and press checkmark.
- Press Cancel (X) to go back to the main menu.
Network Settings
- Press Left/Right to "Menu" and press checkmark.
- Press Left/Right to "Network CFG" and press checkmark.
- Press Left/Right to "Clear Settings" and press checkmark.
- Press Cancel (X) to go back to the main menu.
|
B1160W |
No options available |
B1163 |
No options available |
B1165nfw |
Reset NVRAM/Network System Settings
- Press Menu
- Press Left/Right to "System Setup" and press OK.
- Press Left/Right to "Clear Setting" and press OK.
- Press Left/Right to the desire option and press OK:
- "All Settings" - Clears all of the data stored in memory and resets all of your settings to the factory default.
- "System Setup" - Restores all of the system options to the factory default.
- "Network Setup" - Restores all of the network options to the factory default. (Reboot required.)
|
B1260dn |
- Download the Dell B1260dn Mono Printer Software Suite and Driver.
- After installing, open the Dell Printer Manager and click on the Advanced Options button at the top of the screen.
- In the Advanced Mode, select the printer in the left column and then choose Device Settings. From here, you will want to choose the Network tab:
- At the bottom of this area, there is a Restore Default options for the network settings. This should also reset the EWS password:
- After clearing these settings, you will need to manually reboot the printer for the reset to take effect.
|
B1265dnf |
Reset NVRAM/Network System Settings
- Press Menu
- Press Left/Right to "System Setup" and press OK.
- Press Left/Right to "Clear Setting" and press OK.
- Press Left/Right to the desire option and press OK:
Clear NVRAM from Tech Mode
- To enter Tech Mode, from "Ready", press Menu, #, 1, 9, 3, 4, Menu in sequence.
- Press Left/Right to "Data Setup" and press OK.
- Press Left/Right to "Clear All Mem." and press OK.
OR
- To enter Tech Mode, press Menu, #, 1, 9, 3, 4, Menu in sequence.
- Press Left/Right to "EDC Mode" and press OK.
- Press Left/Right to "NVM Initialize" and press OK.
|
C1660w / C1760nw |
Reset NVRAM/Network System Settings
- Press the Menu button.
- Press Down to "Admin Menu" and press the checkmark.
- Press Down to "Maintenance" and press the checkmark.
- Press Down to "Reset Defaults" and press the checkmark.
- Press the checkmark when "Are you sure?" appears.
- The printer restarts automatically to apply the settings.
Wired Network Settings
- Press the Menu button.
- Press Down to "Admin Menu" and press the checkmark.
- Press Down to "Network" and press the checkmark.
- Press Down to "Reset LAN" and press the checkmark.
- Press the checkmark when "Are you sure?" appears.
- The printer restarts automatically to apply the settings.
Clear NVRAM from Tech Mode
- Turn off the printer.
- Power on the printer while holding Right, Left, and Menu .
- Release these keys when "CE Mode" and "Password" is displayed.
- Press Up key twice and press Select the checkmark.
- "CE Mode" and "ESS Diag" are displayed. (Now in the CE Diag mode.)
- Press Down to "Installation", and press Select the checkmark.
- Press Down to "NVM Init", and press Select the checkmark.
- Press Select the checkmark twice to execute the setting.
- Power cycle the printer to return to "Ready" mode.
|
C1765nf / C1765nfw |
Reset NVRAM/Network/Other Settings System Settings
- Press the Menu button.
- Press Down to "System" and press Select the checkmark.
- Press Down to "Admin Menu" and press Select the checkmark.
- Press Down to "Maintenance" and press Select the checkmark.
- Press Down to "Initialize NVM" and press Select the checkmark.
- Press Down until the desired setting is highlighted, and press Select the checkmark.
- "Reset Defaults and Restart Printer" - initializes the system parameters.
- "Reset Defaults of User (Fax) Section" - initializes the fax number entries in the Address Book.
- "Reset Defaults of User (Scan) Section" - initializes the e-mail and server address entries in the Address Book.
- Press Down to "Yes" and press Select the checkmark.
- The printer restarts automatically to apply the settings.
Wired Network Settings
- Press the Menu button.
- Press Down to "System" and press Select the checkmark.
- Press Down to "Admin Menu" and press Select the checkmark.
- Press Down to "Network" and press Select the checkmark.
- Press Down to "Initialize NVM" and press Select the checkmark.
- Press Down to "Yes" and press Select the checkmark.
- The printer restarts automatically to apply the settings.
Wireless Network Settings
- Press the Menu button.
- Press Down to "System" and press Select the checkmark.
- Press Down to "Admin Menu" and press Select the checkmark.
- Press Down to "Network" and press Select the checkmark.
- Press Down to "Reset Wireless" and press Select the checkmark.
- Press Down to "Yes" and press Select the checkmark.
- The printer restarts automatically to apply the settings.
Clear NVRAM from Tech Mode
- Turn off the printer.
- Turn on the power while holding down Left, Right, and Menu.
- Release these keys when "CE Mode" and "Password" is displayed.
- Press Up twice and press Select the checkmark.
- "CE Mode", "Printer" and "FAX/Scanner" are displayed. (Entered the CE Diag. mode.)
- Press Select the checkmark on "Printer".
- Press Down to "IOT Diag" and press the checkmark.
- Press Down to "Installation Set" and press the checkmark.
- Press Down to "Clear All NVM".
- Press Select the checkmark twice to execute the test.
- Power cycle the printer to return to the regular operating mode.
|
P1500 |
Reset NVRAM System Settings
NOTE: Menus are represented by Ready/Data, Toner Low, Load Paper, and Paper Jam light sequences. Menu items and their settings are indicated by Error and Press Continue light sequences.
- Turn the printer off.
- Open the upper front door.
- Press and hold Continue (right arrow) and Cancel (X) as you turn the printer on. All the lights will cycle.
- Release Continue (right arrow) and Cancel (X).
- Close cover once the error light is displayed.
|