Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

Using ledmon/ledctl utilities on Linux to manage backplane LEDs for PCIE SSD Software RAID drives

Summary: Dell OS and Applications Solutions on Dell TechCenter - Project Sputnik, Microsoft Windows, Red Hat Linux, SUSE, Ubuntu, and more

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Ledmon and ledctl are two utilities for Linux that can be used to control LED status on drive backplanes.  Normally drive backplane LEDs are controlled by a hardware RAID controller (PERC), but when using Software RAID on Linux (mdadm) for PCIE SSD, the ledmon daemon will monitor the status of the drive array and update the status of drive LEDs.

Dell systems use a three-LED status on their backplane.  The activity LED is caused by drive activity, read or write.  Dell uses the following patterns:
 offline  - No LED
 online - Steady green LED
 identify - Slow blinking green LED
 rebuild - Fast blinking green LED
 fail - Orange LED

Ledmon uses the International Blinking Pattern Interpretation (IBPI) specification for displaying which state the drives are in. According to the specification, there can be several states for drive LEDs:
 online
 offline
 identify
 rebuild
 fail
 hotspare
 in critical array
 in failed array

The latest ledmon package ships with RHEL6.3. SLES11 SP2 however uses an older version of ledmon that must be updated in order to support Dell PCIE SSD devices.

Ledmon can be run as a daemon to constantly monitor the status of drives and Software RAID and set the drive LEDs appropriately.  Ledctl can be used to identify an individual drive on a backplane, useful when determining which drive maps to which drive bay slot.  On Dell SSD systems using ledctl and ledmon requires the ipmi drivers to be loaded.

On RedHat Enterprise Linux 6.3:
    # yum install OpenIPMI (or use rpm to install OpenIPMI/OpenIPMI-libs rpms directly)
    # chkconfig --add ipmi
    # service ipmi start
    # ledmon

ledctl usage:
    # ledctl locate=/dev/rssda will blink drive LED
    # ledctl locate={ /dev/rssda /dev/rssdb } will blink both drive LEDs
    # ledctl locate_off=/dev/rssda will turn off the locate LED

If running ledctl and ledmon concurrently, ledmon will eventually override the ledctl settings.

References:
 SGPIO specification: ftp://ftp.seagate.com/sff/SFF-8485.PDF
 IBPI specification: ftp://ftp.seagate.com/sff/SFF-8489.PDF
 Sourceforge project: http://ledmon.sourceforge.net/
Article Properties
Article Number: 000148765
Article Type: Solution
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.