Dell UltraSharp U2722D, U2722DX, and U2722DE Monitor Usage and Troubleshooting Guide
Summary: Learn how to setup and use Dell UltraSharp U2722D, U2722DX, and U2722DE Monitor. Find troubleshooting instructions for common video or display issues.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
For help with video or display issues such as no video or no display, blank or black screen, flickering, resolution or color issues, horizontal or vertical lines, etc. refer to an expanding section below.
The key features of the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor are:
- 68.47 cm (27.0 in.) active area display (measured diagonally) 2560 x 1440 (16:9) resolution, plus full-screen support for lower resolutions.
- Wide viewing angles with 100% sRGB and 100% Rec. 709 color with an average Delta E<2.
- Tilt, swivel, pivot, and vertical extension adjustment capabilities.
- Removable pedestal stand and Video Electronics Standards Association (VESA™) 100 mm mounting holes for flexible mounting solutions.
- Ultrathin bezel minimizes the bezel gap during multimonitor usage, enabling easier setup with an elegant viewing experience.
- Extensive digital connectivity with DP helps future-proof your monitor.
- Single USB-C to supply power to the compatible laptop while receiving video signal (U2722DE only).
- USB-C and RJ45 ports enable a single-cable, network-connected experience(U2722DE only).
- Plug and play capability if supported by your computer.
- On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
- Power and OSD buttons lock.
- Security lock slot.
- ≤ 0.3 W in Off Mode.
- Supports Picture by Picture (PBP) Select mode.
- Allow user to switch USB KVM function in PBP mode (U2722DE only).
- The Monitor is designed with Dell Power Button Sync (DPBS) feature to control personal computer power state from monitor power button (U2722DE only).
- The Monitor allows multiple monitors that are daisy-chained by DisplayPort to synchronize a predefined group of OSD settings in the background by Multi-Monitor Sync (MMS).
- Optimize eye comfort with a flicker-free screen minimizes hazard blue light emission.
- The Monitor adopts Flicker-Free technology, which clears the eye visible flicker, brings comfort viewing experience, and preventing users suffer from eye strain and fatigue.
Warning: The possible long-term effects of blue light emission from the monitor may damage your eyes, including eye fatigue or digital eye strain. ComfortView feature is designed to reduce the amount of blue light that is emitted from the monitor to optimize eye comfort.
Warning: Do not mount this monitor in vertical orientation due to the risk of damaging the monitor.
This section provides some specifications of the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor. To learn more about the specifications of Dell UltraSharp U2722D/U2722DE/U2722DX Monitor, refer to the User's Guide at the Dell Manuals website.
| Model | U2722D/U2722DX | U2722DE |
|---|---|---|
| Panel technology |
|
|
| Maximum resolution |
|
|
| Viewing angle |
|
|
| Contrast ratio |
|
|
| Response time |
|
|
| Color gamut |
|
|
| Color depth |
|
|
| Ports and connectors |
|
|
Ensuring that your Dell monitor is set up properly. Assembling the monitor stand and set up the monitor ergonomically. Connecting the cables and organizing them. These will only help make the viewing experience the best it possibly can be.
Attaching the stand
The standard monitor stand is detached when the monitor is shipped from the factory. To learn more about attaching the standard monitor stand. Refer to the Setting Up the Monitor section in the User's Guide of your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor.
To learn how to set up any other stand with a monitor, refer to the respective stand setup guide for setup instructions.
Caution: Do not remove the monitor from the packaging box before attaching the stand.
Note: The Dell UltraSharp U2722D/U2722DE/U2722DX Monitor is heavy; handle with extreme care. It is recommended to have two people lift or move this monitor.
Ergonomics
Where you put your monitor is almost as important as what model you buy. The monitor should be directly in front of you, at an arm’s length away (between 20-40 inches from your eyes). The top edge of the screen at eye level when you are sitting comfortably. You may adjust your chair height or the height of the monitor to achieve this.
Connecting your monitor to the personal computer
To connect your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor to your personal computer:
- Turn off your personal computer and disconnect the power cable.
- Connect the DisplayPort, HDMI, or USB Type-C cable to the corresponding video or display port on the back of your personal computer.
Note: Dell UltraSharp U2722D/U2722DE/U2722DX Monitor supports display over USB Type-C port with Alternate mode DP 1.4. Ensure that the USB Type-C on your personal computer supports Alternate mode DP 1.2 or above.
To learn more about connecting your monitor to the personal computer, refer to the Dell knowledge-base article: How do I connect a monitor to a personal computer?
- Connect the USB upstream cable to the monitor and personal computer.
Dell UltraSharp U2722D/U2722DE/U2722DX Monitor orientation must always be in landscape mode. This includes any wall-mounted monitors and monitors on a stand. In a multiple monitor setup, Dell UltraSharp U2722D/U2722DE/U2722DX Monitor should not be rotated either to 180° (landscape) or 90° (portrait).
Caution: Dell UltraSharp U2722D/U2722DE/U2722DX Monitor setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.
When setting up your Dell UltraSharp U2722D/U2722DE/U2722DXMonitor, ensure that the monitor front panel buttons are on the bottom right.
Using the Tilt, Swivel, and Vertical Extension
Note: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set-up instructions.
With the stand that is attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle.
Figure 2: Using Tilt and Swivel on Dell UltraSharp U2722D/U2722DE/U2722DX Monitor
When mounted on the wall or on a monitor arm, the set-up must comply with the recommended panel orientation and working angle.
Figure 3: Orientation of Dell UltraSharp U2722D/U2722DE/U2722DX Monitor
Figure 4: Illustration of Dell UltraSharp U2722D/U2722DE/U2722DX Monitor dual monitor setup
Warning: The monitor should not be rotated 180° (landscape). The monitor should not be orientated at 90° (portrait).
Use the buttons at the bottom of the monitor to access the On-Screen Display (OSD) menu of the monitor. To access the On-Screen Display (OSD) menu, press Button 5 (Figure 1) at the back of the monitor.
Learn more about using the On-Screen Display (OSD) menu. Refer to the Operating Your Monitor section in the User's Guide of Dell UltraSharp U2722D/U2722DE/U2722DX Monitor.
Note: Any changes that you make are automatically saved. Whenever you move to another menu item, exit the OSD menu, or wait for the OSD menu to automatically close.
Figure 5: Dell UltraSharp U2722D/U2722DE/U2722DX Monitor Back View
Resetting a monitor to factory defaults can help resolve many video or display issues. To reset your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor to factory default settings, follow these instructions:
- Press Button 5 (Figure 5) on the monitor to enter the On-Screen Display (OSD) Menu.
- Resets all settings under the Others menu.
- Select to Factory Reset.
- Press to √ select this function.
If your Dell monitor has a blank or black screen, fuzzy or blurry image, flickering, distorted or any other screen abnormalities, running a diagnostic test will help determine if the Dell monitor is functioning normally. To learn more about diagnostic options on a Dell monitor, refer to the Dell knowledge-base article: How do I run diagnostics on a Dell monitor?
It is always essential to isolate the monitor while troubleshooting your computer for the following scenarios:
- No Power - Your computer is not powering ON or showing any signs of power.
- No POST - Your computer is not showing any indication of activity, the screen might be blank and will not display the Dell logo during start-up.
- No Video - You are unable to see any display on the screen, able to hear the windows chime but no display is seen.
Your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor provides a self-test feature check that allows you to check whether the monitor is functioning properly. If the monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
- Turn off both your computer and the monitor.
- Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove the video cables (VGA, DVI, HDMI, or DisplayPort) from the back of the computer.
- Turn on the monitor.
- Turn off your monitor and reconnect the video cable: then turn on both your computer and the monitor.
- If your monitor screen remains blank after you use the previous procedure, check your video card (GPU) and computer, because your monitor is functioning properly.
Your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor has a built-in diagnostic tool. It helps to determine if the screen abnormality you are experiencing is a problem with the monitor or with the video card on your computer.
When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade, it is always a good practice to isolate the monitor by running the Built-In Diagnostics.
- Ensure that the screen is clean (no dust particles on the surface of the screen).
- Press and hold Up or Down or Left or Right direction for 4s until a menu appears on the screen.
- Using the Joystick control, highlight the Diagnostics option and press the Joystick button to start the diagnostics. A gray screen is displayed.
- Observe if the screen has any defects or abnormalities.
- Toggle the Joystick once again until a red screen is displayed.
- Observe if the screen has any defects or abnormalities.
- Repeat steps 5 and 6 until the screen displays green, blue, black, and white colors. Note any abnormalities or defects.
Note: If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card (GPU) and the computer.
If you notice any abnormalities during Built-In Diagnostics, you may get the monitor repaired or replaced if it is under warranty by contacting Dell Technical Support.
If you notice any abnormalities during Built-In Diagnostics, you may get the monitor repaired or replaced if it is under warranty by contacting Dell Technical Support.
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. Which is hard to see and does not affect the display quality or usability. For more information, refer to the Dell knowledge-base article Dell LCD Monitor Pixel Guidelines.
This section provides information about troubleshooting steps that can help resolve the most common issues with the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor. Alternatively, to learn more about troubleshooting common issues on Dell monitors, refer to the Dell knowledge-base article Troubleshooting Display or Video Issues on a Dell Monitor.
| Common Symptoms | What You Experiences | Possible Solution |
|---|---|---|
| No Video - Power LED Off | No picture |
|
| No Video - Power LED On | No picture or no brightness. |
|
| Poor Focus | Picture is fuzzy, blurry, or ghosting. |
|
| Shaky or Jittery Video | Wavy picture or fine movement. |
|
| Missing Pixels | The LCD screen has spots. |
|
| Stuck-On/Off Pixels | The LCD screen has bright spot. |
|
| Brightness Problems | Picture too dim or too bright. |
|
| Geometric Distortion | Screen not centered correctly. |
When using DisplayPort input, the positioning adjustments are not available. |
| Horizontal or Vertical Lines | The screen has one or more lines. |
When using DisplayPort input, the positioning adjustments are not available.
|
| Synchronization Problems | The screen is scrambled or appears torn. |
|
| Safety-Related Issues | Visible signs of smoke or sparks. |
|
| Intermittent Problems | Monitor malfunctions on and off. |
|
| Missing Color | Picture does not have color. |
|
| Wrong Color | The picture color is not good. |
|
| Image Retention from a Static Image Left on the Monitor for a Long Period | A faint shadow from the static image appears on the screen. |
|
| The screen image is too small. | The image is centered on the screen but does not fill the entire viewing area. |
|
| Image Ghosting | Fast-moving images leave a trail of shadow images. | On certain videos and applications with fast-moving images, imaging ghosting, which appears as a trailing shadow, may occur. Change the Response Time to Fast in the Display menu. |
| No Input Signal when user controls are pressed. | No picture, the power LED light is white. |
|
| The picture does not fill the entire screen. | The picture cannot fill the height or width of the screen. |
|
| Display mode changes from "Second screen only" to "Extended mode" after opening and closing the laptop LCD. | The display mode on your personal computer reverts to "Duplicate" or "Extend". This depends on which was selected before you changed to "Second screen only" or "Projector only" when you close and open the laptop screen. When you close and then reopen the lid on a laptop, the Connecting and Configuring Displays (CCD) feature in Windows automatically reverts the display mode to the last active selection. This behavior is by design in Microsoft Windows. |
Switch to the display mode that you want after you close and reopen the laptop screen manually:
|
| Monitor has sound icon when Dell UltraSharp U2722D/U2722DE/U2722DXMonitor is connected to a laptop using HDMI. | Dell UltraSharp U2722D/U2722DE/U2722DX Monitor does not support audio or sound by HDMI. Speakers or headphones must be connected by the audio connector on the personal computer. |
To resolve the audio icon displaying, update the video or graphics (GPU) driver to the latest version. To learn how to download and update a device driver, refer to the Dell knowledge-base article How do I download and install a device driver? |
| The monitor will not display Blu-Ray video after the monitor is powered off and powered on. | If the monitor is powered-off and powered-on when displaying the Blu-Ray video, the Blu-ray player may lose the data signal from the computer to the monitor. |
|
| No video when the monitor is connected to a Dell docking station. | The monitor may not receive video signals from the personal computer when connected to a Dell docking station. | To learn more about how to set up and configure the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor with a Dell docking station. Refer to your System Requirements and Supported Configuration in the support site. |
| Light leak from the monitor | The monitor appears to have a light leak from the edges in a dark room | This is the normal behavior of the monitor. Dell consumer monitors are inspected at 150-lux ambient lighting (similar to typical office lighting). Dell UltraSharp and Gaming monitors are inspected with tighter criteria of 70-lux ambient lighting (dimly lit room but not dark). |
| Troubleshooting USB Issues | ||
|---|---|---|
| Specific Symptoms | What User Experiences | Possible Solution |
| The USB interface is not working. | USB peripherals are not working. |
|
| Super-Speed USB 3.2 Gen2 interface is slow. | Super speed USB 3.2 Gen2 peripherals working slowly or not working at all |
|
| Wireless USB peripherals stop working when a USB 3.0 device is plugged in. | Wireless USB peripherals responding slowly or only working as the distance between themselves and their receiver decreases. |
|
| USB is not working. | No USB functionalities | Refer to input source and USB pairing table. |
To learn more about how to view or download the User Guides and Manuals for your Dell product. Refer to the Dell knowledge-base article Manuals and Documentation for your Dell Product.
- Dell UltraSharp U2722D/U2722DE/U2722DX Monitor – User’s Guide
- Dell UltraSharp U2722D/U2722DE/U2722DX Monitor – Quick Setup Guide
- Dell UltraSharp U2722D/U2722DE/U2722DX Monitor – Dell Display Manager User’s Guide
Frequently asked questions
Using Windows Display Settings
In Windows 7, Windows 8, or Windows 8.1:
- For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop view.
- Right-click the desktop and click Screen Resolution.
- Click the dropdown list of the Screen Resolution and select 2560 x 1440.
- Click OK
In Windows 10:
- Right-click the desktop and click Display Settings.
- Click Advanced display settings.
- Click the dropdown list of Resolutions and select 2560 x 1440.
- Click Apply.
Note: If you do not see the recommended resolution as an option. You may update the video card (GPU) driver by visiting the Dell Drivers & Downloads website or the video card (GPU) manufacturers website. To learn how to download and update a device driver, refer to the Dell knowledge-base article: How do I download and install a device driver?
To reset the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor to factory defaults, refer to the Reset to Factory Settings section of this article.
The Dell UltraSharp U2722D/U2722DE/U2722DX Monitor has two built-in diagnostics that are available:
- Self-Test Feature Check - The self-test feature check on the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor allows you to check whether the monitor is functioning properly.
- Built-In Self-Test - The Dell UltraSharp U2722D/U2722DE/U2722DX Monitor has a built-in self-test that helps you identify if the screen abnormality is with the monitor or the video card (GPU) on your computer. When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade. It is always a good practice to isolate the monitor by running the Built-In Diagnostics.
To learn how to run a diagnostic test, refer to the Running Diagnostics on Dell UltraSharp U2722D/U2722DE/U2722DX Monitor section of this Dell knowledge-base article.
The Troubleshooting section of this Dell knowledge-base article provides information about troubleshooting common issues with the Dell UltraSharp U2722D/U2722DE/U2722DX Monitor. The section has troubleshooting steps on how to resolve power issues, video issues, color or clarity issues, distortion issues, horizontal or vertical lines, brightness issues or pixel issues and so on.
To navigate the On-Screen Display (OSD) menu, use the buttons on the monitor. The monitor control buttons are usually on the right side, either on the side, front, or bottom of the monitor. To access the On-Screen Display (OSD) menu, press Button 5 on the monitor.
For more information about using the On-Screen Display (OSD) menu and different menu options. Refer to the Operating Your Monitor section in the User's Guide of your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor.
.More monitor information like the model number, firmware version, and Service Tag can be accessed from the monitor's OSD (On-Screen Display).
- Press Button 5 (Figure 5) on the monitor to enter the On-Screen Display (OSD) Menu.
- Under the Other menu select Display info.
- Check your model information.
Dell UltraSharp U2722D/U2722DE/U2722DX Monitor orientation must always be in landscape mode. This includes any wall-mounted monitors and monitors on a stand. In a multiple monitor setup, Dell UltraSharp U2722D/U2722DE/U2722DX Monitor should not be rotated either to 180° (landscape) or 90° (portrait).
Caution: Dell UltraSharp U2722D/U2722DE/U2722DX Monitor setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may cause.
When setting up your Dell UltraSharp U2722D/U2722DE/U2722DX Monitor, ensure that the monitor front panel buttons are on the bottom right.
Products
Dell U2722D, Dell U2722DE, Dell U2722DXArticle Properties
Article Number: 000184850
Article Type: How To
Last Modified: 18 Apr 2024
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.