Article Number: 000118094
命令 | 用途 |
Force10# configure |
進入組態模式。 |
Force10(conf)# protocol spanning-tree rstp |
進入 RSTP 組態模式。 |
Force10(conf-rstp)# bridge-priority 4096 (primary peer) Force10(conf-rstp)# bridge-priority 8192 (secondary peer) |
選用:設定 RSTP 橋接器優先順序。*這些優先順序並非 VLT 對獨有,並會用於顯示主要優先順序。使用 4096 的較高倍數,以避免主網橋成為根網橋。 |
Force10(conf-rstp)# no disable |
啟用生成樹通訊協定。 |
命令 | 用途 |
Force10# configure |
進入組態模式。 |
Force10(conf)# interface range fortyGigE 0/56 , fortyGigE 0/60 |
進入介面組態模式。請注意逗號前後所需的空格。 |
Force10(conf-if-range-fo-0/56,fo-0/60)# no shutdown |
啟用介面範圍。 |
Force10(conf-if-range-fo-0/56,fo-0/60)# interface port-channel 100 |
進入連接埠通道組態模式 |
Force10(conf-if-po-100)# channel-member fortyGigE 0/56,60 |
將物理介面添加到埠通道。 |
Force10(conf-if-po-100)# no shutdown |
啟用連接埠通道。 |
命令 | 用途 |
Force10# configure |
進入組態模式。 |
Force10(conf)# vlt domain 1 |
進入網域 ID 1-1000 的 VLT 網域組態模式 |
Force10(conf-vlt-domain)# primary-priority 10 (primary peer) Force10(conf-vlt-domain)# primary-priority 20 (secondary peer) |
選用:為每個同儕交換器指定 VLT 優先順序。1-65535 (從高到低) |
Force10(conf-vlt-domain)# back-up destination 1.1.1.2 (primary peer) Force10(conf-vlt-domain)# back-up destination 1.1.1.1 (secondary peer) |
指定同儕交換器的管理 IP 位址。這將設置監視對等系統狀態的活動信號。 |
Force10(conf-vlt-domain)# peer-link port-channel 100 |
將 VLTi LAG 與 VLT 網域建立關聯。 |
Force10(conf-vlt-domain)# system-mac <mac-address>此外,請在 VLT 對等交換器上設定相同的 MAC 位址。當一個對等交換器重新開機時,此命令用於最大限度縮短 VLT 系統同步兩個對等交換器上 VLT 網域的預設 MAC 位址所需的時間。
命令 | 用途 |
Force10# configure |
進入組態模式 |
Force10(conf)# interface tengigabit 0/20 |
進入介面組態模式 |
Force10(conf-if-te-0/20)# port-channel-protocol lacp |
進入 LACP 組態模式 |
Force10(conf-if-te-0/20-lacp)# port-channel 20 mode active |
將 LACP LAG 的連接埠通道設為「使用中模式」 |
Force10(conf-if-te-0/20-lacp)# interface port-channel 20 |
進入連接埠通道組態模式 |
Force10(conf-if-po-20)# portmode hybrid |
Portmode hybrid 可讓介面傳遞已標記和未標記的流量。 |
Force10(conf-if-po-20)# switchport |
交換器連接埠可讓介面處於第 2 層模式。 |
Force10(conf-if-po-20)# vlt-peer-lag port-channel 20 |
將連接埠通道指派為 VLT 連接埠通道 |
Force10(conf-if-po-20)#end |
結束組態模式 |
Force10# write |
儲存組態 |
Force10# show vlt brief VLT Domain Brief ------------------------------------------------- Domain ID: 1 Role: Primary Role Priority: 10 ICL Link Status: Up Heartbeat Status: Up VLT Peer Status: Up Local System MAC address: 00:01:e8:8b:19:37 Remote System MAC address: 00:01:e8:8b:18:b9 Configured System MAC address: aa:11:22:33:44:55
Force10# show vlt brief VLT Domain Brief ------------------------------------------------- Domain ID: 1 Role: Secondary Role Priority: 20 ICL Link Status: Up Heartbeat Status: Up VLT Peer Status: Up Local System MAC address: 00:01:e8:8b:18:b9 Remote System MAC address: 00:01:e8:8b:19:37 Configured System MAC address: aa:11:22:33:44:55
Force10# show vlt statistics ----------------------------------------------------- HeartBeat Messages Sent: 95446 HeartBeat Messages Received: 95440 ICL Hello's Sent: 95420 ICL Hello's Received: 95414 Domain Mismatch Errors: 0 Version Mismatch Errors: 0 Config Mismatch Errors: 0驗證 VLT 備份連結狀態:
Force10# show vlt backup-link VLT Backup Link -------------------------------------------------- Destination: 1.1.1.2 Peer HeartBeat status: Up HeartBeat Timer Interval: 1 HeartBeat Timeout: 3 UDP Port: 34998 HeartBeat Messages Sent: 95305 HeartBeat Messages Received: 95299
Force10# show vlt backup-link VLT Backup Link -------------------------------------------------- Destination: 1.1.1.1 Peer HeartBeat status: Up HeartBeat Timer Interval: 1 HeartBeat Timeout: 3 UDP Port: 34998 HeartBeat Messages Sent: 95305 HeartBeat Messages Received: 95299
Force10# show vlt mismatch
22 Mar 2024
5
How To