Instructions
この文書では、Dell ネットワーキング Force10 スイッチでポートベースの VoIP QoS を設定する方法について説明し ます。
QoS 設定ポートベースの VOIP の例
ここでは、VoIP 電話が DSCP 値46を使用してトラフィックを送信します。 Dell ネットワーキング Force10 スイッチは、進入トラフィックの DSCP 値を信頼し、このトラフィックを処理するハードウェアキューに優先順位を設定します。 次の手順に従います。
1 入力ポリシーマップを設定して、入力 DSCP 値を信頼します。
2 入力ポリシーマップとインターフェイスを接続します。
3 厳格な優先順位を使用するように、DSCP 値46にマッピングされたハードウェアキューを設定 します。
デフォルトでは、マップは DSCP 値46をハードウェアキュー2に設定されています。
コマンド
パラメータ
Force10 # カンファレンス
設定モードに入ります。
Force10 (会議) # policy-map-my trust-dscp を入力します。
入力ポリシーマップを作成します。 この行は、「my-trust-dscp 」という名前を使用しています。
Force10 (カンファレンス-ポリシー-map-in) # trust diffserv
DSCP 値を信頼します。
Force10 (ポリシー-map-in) # インターフェイス te 0/0
インターフェイス設定モードを入力します。 ここでは、range コマンドを使用できます。
Force10 (会議-if-te-0/0) # service-policy input my trust-dscp Force10 (カンファレンス-if-te-0/0) # exit
ポリシーマップを入力ポリシーとしてインターフェイスに添付します。
Force10 (会議) # 厳格な優先度の高いユニキャスト2
厳格な優先順位設定を使用するためのハードウェアキューの指定
Dell ネットワーキング Force10 デバイスは、特定のハードウェアキューに対して DSCP 値に対して次のデフォルトマッピングを使用します。
DSCP 値
S、C、Z シリーズキュー
E シリーズキュー
0-15
0
0-1
16-31
1
2-3
32-47
2
4-5
48-63
3
6-7
構成の確認
Force10 # show qos ポリシー-マップの概要
インターフェイスポリシー-map-input policy-map-output Te 0/0 my trust-dscp -
Force10 # show qos ポリシー-map 詳細 te 0/0
インターフェイス TenGigabitEthernet 0/0 ポリシー-map-my trust-dscp を入力します。 信頼の diffserv Queue # Class-map-name QoS-policy-name
Affected Products
Force10 S25-01-GE-24P, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S5000, Force10 S50P, Force10 S55T
, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, Force10 Z9000, Dell Networking Z9500, Dell Networking S3100 Series, PowerSwitch Z9100-ON
...
View More
about warranties
View Less
about warranties