本文適用于具有單一控制器組態的 PowerVault ME5012 或 ME5024 陣列。
如果系統管理員嘗試使用 PowerVault Manager 變更 ME5 單一控制器系統的預設管理 IP 位址 (10.xx.xx.x) (請參閱附加的螢幕擷取畫面),「Set IPV4」按鈕不會啟動。
嘗試其他網頁瀏覽器或清除網頁瀏覽器快取不會對問題產生任何影響。
此問題會影響具有控制器韌體版本ME5.1.0.0.0的 PowerVault 系統,並將在未來的韌體版本中獲得解決。
# set network-parameters ip 192.xxx.xx.x netmask 255.xxx.xxx.xxx gateway 192.xxx.xx.x controller a
# set network-parameters ip 192.xxx.xx.x netmask 255.xxx.xxx.xxx gateway 192.xxx.xx.x controller b