Zu den Hauptinhalten
Abmelden

Willkommen bei Dell

Mein Konto
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.
Anmelden Konto erstellen Premier-Anmeldung Anmeldung beim Partnerprogramm
Kontakt

Ihr Warenkorb bei Dell.com

OptiPlex 7050 MT (Mini Tower) Teardown removal guide for customer replaceable units (CRUs)

Zusammenfassung: This article takes you through the removal steps for those parts of the OptiPlex 7050 Mini Tower that Dell considers it easy for anyone to remove and replace.

Dieser Artikel gilt für   Dieser Artikel gilt nicht für 
Sehen Sie sich die Ressourcen an für

Symptome

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of an OptiPlex 7050 Mini Tower system. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.) The guides will also include pictures to reference what's involved.

Table of Contents:

  1. CRU Removal Guide
  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

The article below provides information on safe practises you should be taking into consideration before working with electrical equipment.


Back to Top

 

Removal Instructions

 

SLN307833_en_US__1icon Note: Please click on the title of the section you want to open below, to see the contents.

 

|

 

SLN307833_en_US__2ReqTools_E7450_BKeith_01

 

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flathead screwdriver    
 
SLN307833_en_US__1icon Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without speciality tools, that aren't available to our onsite engineers.

 

  1. Pre-Removal Instructions Before removing the System Cover:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. Slide the Blue tab on the rear of the PC towards the cover grip [1] and pull the cover towards the rear of the PC [2].

SLN307833_en_US__47050_MT_Cover_BK_01

  1. Lift the cover-up and away from the system.

SLN307833_en_US__57050_MT_Cover_BK_02

 

  1. Pre-Removal Instructions Before removing the Front Bezel:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover

  2. Lift the three tabs [1] and pull the bezel away from the chassis [2].

SLN307833_en_US__67050_MT_Bezel_BK_01

 

  1. Pre-Removal Instructions Before removing the Memory Module:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Open the front Panel Door and pull the tabs on either side of the memory module away from the module.

SLN307833_en_US__77050_MT_Memory_BK_01

  1. Pull the memory module up and out of the slot.

SLN307833_en_US__87050_MT_Memory_BK_02

 
SLN307833_en_US__1icon Note: Repeat steps 2 and 3 for any additional memory modules in the system.
 

 

  1. Pre-Removal Instructions Before removing the Optical Disc Drive:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Swing open the front panel door and disconnect the power and data cables from the rear of the Optical drive [1] and close the panel door [2].

SLN307833_en_US__107050_MT_ODD_BK_01

  1. Squeeze the blue release tab [1] and push the optical drive out the front of the chassis [2].

SLN307833_en_US__117050_MT_ODD_BK_02

 

 

  1. Pre-Removal Instructions Before removing the 2.5" Hard Disk Drive (HDD):

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Swing open the front panel door and disconnect the power and data cables from the 2.5" drives in the cage at the top of the door panel [1].

SLN307833_en_US__127050_MT_HDD_BK_04

  1. Press the blue tabs in towards the drive [2] and pull the assembly out of the cage [3].

  2. Pull one side of the assembly bracket away from the drive to disengage the securing pins [1].

SLN307833_en_US__137050_MT_HDD_BK_05

  1. Lift the drive out of the assembly bracket [2].

SLN307833_en_US__147050_MT_HDD_BK_055

  1. Pre-Removal Instructions Before removing the 3.5" Hard Disk Drive (HDD):

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Disconnect the power and data cables from the back of the 3.5" HDD in the cage at the bottom of the front panel door.

SLN307833_en_US__157050_MT_HDD_BK_01

  1. Press down on the blue tab in the middle of the front panel door [1] and pull the assembly out the front of the chassis [2].

SLN307833_en_US__167050_MT_HDD_BK_02

  1. Pull one side of the assembly away from the drive to disengage the securing pins.

SLN307833_en_US__177050_MT_HDD_BK_03

  1. Lift the hard drive out of the assembly.

SLN307833_en_US__187050_MT_HDD_BK_035

  1. Pre-Removal Instructions Before removing the M.2 PCIe Solid State Drive (SSD):

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Open the front panel door and pull up on the blue tab that secures the M.2 PCIe SSD to the motherboard [1].

SLN307833_en_US__197050_MT_SSD_BK_01

  1. Lift the card and remove from the PCIe slot [2].

 

  1. Pre-Removal Instructions Before removing the Expansion Cards:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Swing open the front panel door and pull up on the release latch to unlock any expansion cards [1].

SLN307833_en_US__207050_MT_Expansion_BK_01

  1. Push the release tab at the back of the card [2] and pull the card up and out of the PC [3].

 

  1. Pre-Removal Instructions Before removing the Coin Cell Battery:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Open the front panel door and press the release latch until the coin cell battery pops up [1].

SLN307833_en_US__217050_MT_CoinCell_BK_01

  1. Remove the battery from the Motherboard [2].

 

  1. Pre-Removal Instructions Before removing the VGA Daughter Board:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Remove the two (2) screws that secure the VGA connector to the rear of the PC [1].

SLN307833_en_US__227050_MT_VGA_BK_01

  1. Remove the screw that secures the daughterboard to the motherboard [2].

  2. Use the built-in handle to pull the daughter board out of the PC [3].

 

  1. Pre-Removal Instructions Before removing the Power Supply Unit (PSU):

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the System Cover and Front Bezel

  2. Swing open the front panel door and disconnect the power cables from the motherboard [1 & 2].

SLN307833_en_US__237050_MT_PSU_BK_01

  1. Pull the release clip that secures the cables together [3] and un-route the power cable from the retention clip [4].

  2. Remove the three (3) screws securing the PSU to the rear of the chassis [5].

  3. Push the PSU release tab down [1] and then pull and lift the PSU out of the PC [2].

SLN307833_en_US__247050_MT_PSU_BK_02

If you require further assistance, please contact technical support.
Contact Us Go back to the OptiPlex 7050 teardown contents page

Ursache

N/A

Lösung

N/A

Betroffene Produkte

OptiPlex 7050 Tower
Artikeleigenschaften
Artikelnummer: 000138295
Artikeltyp: Solution
Zuletzt geändert: 29 Sept. 2023
Version:  6
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.
Artikeleigenschaften
Artikelnummer: 000138295
Artikeltyp: Solution
Zuletzt geändert: 29 Sept. 2023
Version:  6
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.