Dell USB-C and Thunderbolt Docks (WD15, TB16, TB18DC, and D6000 Series) - BIOS Settings and Driver Installation for Troubleshooting

Most problems when using a USB-C or Thunderbolt Docking Station can be solved by installing the latest BIOS, firmware, and drivers. There are up to nine software components that must be installed depending on the model of the Docking Station.

Follow the instructions in sections 1 and 2 carefully to ensure that the software is installed correctly. Then, follow the instructions in section 3 to configure the BIOS settings for your computer.

Table of Contents

1. Updating Docking Station to Resolve Problems
2. Important BIOS Settings
3. Advanced Troubleshooting Links

No cause information is available.

1. Updating Docking Station to Resolve Problems

WD15, TB16, TB18DC Updates

When troubleshooting a Docking Station problem. Dell Technologies recommends manually downloading and installing updates from the Dell Drivers & Downloads page. This ensures that all required software is installed, and the latest versions are used.

Windows Operating System and Dell Driver Updates:

1. Manually download and update the Docking Station firmware from the Dell Drivers & Downloads page.
   
   The Docking Station must remain connected to the computer during the update. Power cycle the Docking Station once the firmware has been updated. (See instructions for the reset procedure above.)
2. Run Windows Update to ensure that the operating system is up to date.
3. Run SupportAssist (all models), or Dell Command | Update (Precision, XPS, and Latitude) or Dell Update (Vostro, Inspiron, and G-Series) to update the computer BIOS and drivers for both the computer and dock. Drivers can also be manually downloaded and installed. (Table 1.) These computer BIOS (the computer reboots when running the BIOS update), drivers, and the drivers for the dock can be downloaded from the Dell Support Website. (The USB Audio jack driver only applies to docks with 3.5 mm jacks.)

Table 1. WD15, TB16, and TB18DC Docking Station Drivers and Firmware.

• The dock must be connected to the computer to run the firmware update.
• Power cycle the dock once the firmware has been updated. (See instructions above)

4. Test the Docking Station to see if the issues are resolved.

If the issues persist, confirm that the BIOS settings are correct: Important BIOS Settings

Dell Universal Docking Station (D6000 Series) Updates

For the Dell Universal Docking Station (D6000 Series), download and install the following drivers and firmware:

1. The system BIOS (the computer reboots).
2. The DisplayLink driver from the DisplayLink Page .
3. The D6000 firmware update from the Dell Drivers & Downloads Page.

Back to Top

2. Important BIOS Settings

The necessary BIOS settings are similar for all USB Type-C Docking Stations. See the individual notes in the following instructions.

Reboot your computer and press the F2 multiple times when the Dell logo appears. In the BIOS, proceed as follows:

1. Browse to System Configuration and then to USB-Configuration.
2. Select the options Enable USB Boot Support and Enable External USB Port.
3. Browse to Dell Type-C Dock Configuration and select Always Allow Dell Docks.

4. Under System Configuration, browse to USB PowerShare and activate this option.
5. Browse to Thunderbolt Adapter Configuration, and select Enable Thunderbolt Technology Support, Enable Thunderbolt Adapter Boot Support and Enable Thunderbolt Adapter Preboot Modules.

6. In the same category, select Security Level - No Security.

7. Now browse to POST Behavior and Fastboot. Select Thorough.
8. On the bottom right, click the Apply button to save the changes made. Exit the BIOS by clicking the Exit button.

Back to Top

3. Advanced Troubleshooting Links

General Information about the Docking Stations:

• How to Use and Troubleshoot Dell Docking Station WD15
• Dell Universal Docking Station (D6000 Series) User Guide
• What is MAC Address pass through?

Troubleshooting:

• WD15, TB16, and TB18DC docks not detected when AC power is cut/disconnected then reconnected.
• How to Use and Troubleshoot Dell Docking Station WD15
• How to Use and Troubleshoot Dell Thunderbolt Dock TB16
• Dell Universal Dock (D6000 series) system charging limitations
• Kaby Lake systems with USB Type-C DP only (non-ThunderBolt) connections using WD15 or DS1000 may have blanking external video.
• Driver Installation Guide for Dell Thunderbolt Docking Station WD19TB/WD19TBS
• Driver Installation Guide for Dell Performance Docking Station WD19DC/WD19DCS

Back to Top

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

• How to Use and Troubleshoot Dell Thunderbolt Dock TB16
• Dell WD19 Series Dock BIOS Settings and Driver Installation for Troubleshooting
• Some Systems with USB Type-C Port Lack a Thunderbolt 3 Controller
• How to Use and Troubleshoot Dell Thunderbolt Docking Station WD19TB or WD19TBS

Out of warranty? No problem. Browse to the Dell.com/support website and enter your Dell Service Tag and view our offers.