OptiPlex 3050 Support for PCIe M.2 SSD Hard Drives
Oversigt: This article provides information about the OptiPlex 3050 support for M.2 SSD PCIe hard drives.
Denne artikel gælder for
Denne artikel gælder ikke for
Denne artikel er ikke knyttet til et bestemt produkt.
Det er ikke alle produktversioner, der er identificeret i denne artikel.
Symptomer
The M.2 slot on the OptiPlex 3050 supports only PCIe M.2 SSD hard drives. This article provides additional information about this issue to ensure that the correct M.2 SSD hard drive is installed.
Årsag
No cause information
Løsning
The drive must use the PCIe bus instead of SATA when installing an M.2 SSD hard drive in the OptiPlex 3050. The following image (Figure 1) provides a visual reference for the two formats:
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Flere oplysninger
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
Berørte produkter
OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form FactorArtikelegenskaber
Artikelnummer: 000129720
Artikeltype: Solution
Senest ændret: 27 jul. 2024
Version: 9
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.